Specs

Bridgestone Retail Operations, LLC
PROJECT MANUAL
Version: January 2012
SECTION 16520
EXTERIOR LUMINAIRES
PART 1 GENERAL
1.01 SECTION INCLUDES
A. Exterior luminaires and accessories.
B. Poles.
1.02 QUALITY ASSURANCE
A. Conform to requirements of NFPA 70.
B. Electrical Components: Listed and classified by Underwriters Laboratories, Inc. as suitable for the
purpose specified and indicated.
1.03 EXTRA MATERIALS
Furnish two of each type and wattage lamp installed.
PART 2 PRODUCTS
2.01 LUMINAIRES
Furnish products as indicated in drawing fixture schedule.
2.02 LAMPS
Lamp Types: Acceptable Manufacturers: GE, Phillips, Sylvania.
PART 3 EXECUTION
3.01 INSTALLATION
A. For non-direct burial poles only, provide concrete bases for lighting poles at locations indicated, in
accordance with Section 03300. For direct burial poles see Drawings for information.
B. Install poles plumb.
1. Provide shims to adjust plumb.
2. Grout around each base.
C. Install lamps in each luminaire.
D. Bond luminaires, metal accessories, and metal poles to branch circuit equipment grounding
conductor. Provide supplementary grounding electrode at each pole.
3.02 FIELD QUALITY CONTROL
A. Operate each luminaire after installation and connection. Inspect for improper connections and
operation.
B. Measure illumination levels to verify conformance with performance requirements. Take
measurements during night sky, without moon or with heavy overcast clouds effectively obscuring
moon.
3.03 PROTECTION OF FINISHED WORK
Relamp luminaires which have failed lamps at Substantial Completion.
END OF SECTION
EXTERIOR LUMINARIES 16520 - Page 1 of 1