Safety Integrated - Industry - Siemens

Ex. No.
4.6
K1
K2
L+
N/
M
M
L+
L / L+
L+ M
Wiring of the protective door and the safety monitor
Important Hardware Component Settings
M
L+
1.
Y1
K1
E1(
+ )
3SE2
840-6XX00
DP/AS-i LINK Advanced
Prerequisites:
■ The DP/AS-INTERFACE LINK Advanced is mounted and connected
to the AS-i line.
■ The AS-i power supply unit is connected to the AS-i line.
■ The AS-i slaves are not yet connected.
■ The slaves that are to be connected have default address "0"
(delivery status).
120 Functional Example No. CD-FE-I-035-V10-EN
K1
K2
K2
1.
32
Start
1.
13
1.
23
1. Y1
2. 13
2.
23
2.
Y1
AS-i+
AS-i-
1. Y2
2.
Y2
AS-i
1
2
3
1 READY
2 ON
3 FAULT
M
Service
1
2
3
CONFIG
1.
14
1.
24
PE
2.
14
2.
24
2.
32
E2(
-)
31
41
PIN
1 = Terminal 12
PIN
2 = Terminal 11
PIN
3 = n.
c.
PIN
4 = n.
c.
Magnet
3
32
42
4
5
2
Actuator
11
12
1
21
22
F-
IN2
Protective door
F-
IN1
ADDR
AS-i
FAULT
SIEMENS
3RK1205-0BQ00-0AA3
3
4
5
2
1
Closed
Procedure/Working on the DP/AS-INTERFACE LINK Advanced:
■ Switch on the AS-i power supply unit so that the DP/AS-
INTERFACE LINK Advanced is in operation
■ Connect each AS-i slave to the AS-i line and allocate the
desired slave address (K45F module, address 1 / K45 standard
module, address 2).
SYSTEM AS-i line 1 Lifelist Change address
Change slave address
■ Adopt the actual configuration of the slave as the defined
configuration in the DP/AS-INTERFACE LINK Advanced
SYSTEM AS-i line 1 Lifelist Actual -> Defined
Actual -> Adopt defined
21
Result:
All displays for the AS-i line on the DP/AS-INTERFACE LINK Advanced
are off or green, i.e. all slaves have been successfully
integrated.
22
13
14
3SE2120-1GW
PIN
1 = Terminal 21
PIN
2 = Terminal 22
PIN
3 = n.
c.
PIN
4 = n.
c.
Open