Safety Integrated - Industry - Siemens

Ex. No.
3.5
Note Diagram
Safety shutdown group
The safety shutdown group must be set.
This number is compared with the safety-related mechanical assignment
on the terminal module - this is not visible from outside - and
must match this.
Default: Not assigned
Rated operating current
Here, the rated operating current is entered, which the feeder can
conduct without any interruption (switching device and motor) (rated
motor current). The current that can be set depends on the motor
starter current range (e.g. 0.3 A to 3 A; 2.4 A to 8 A; 2.4 A to 16 A).
This can be set in 10 mA steps within a specific range.
-> Wide range setting
Default: Minimum value
Current limit
Upper current limit:
The mechanical system/equipment is more difficult to move - e.g. if
the bearings are damaged, the mixture being mixed is too viscous
-> current is greater than that set
Lower current limit:
The mechanical system/equipment is easier to move, e.g. the material
being processed in the plant or system is no longer present, drive
belts broken
-> current is less than that set
Protection by evaluating how the current limit is violated
Default: Alarm
68 Funktionsbeispiel Nr. CD-FE-I-029-V10-DE