Safety Integrated - Industry - Siemens

Example Code
This chapter describes which functions are implemented and how the asimon program is structured.
Description of the asimon Program
Description Parameters
After the asimon software has been started, the start assistant is used
to create a new safety monitor configuration.
Enter a name for the configuration in the Information about monitor
tab, and select the operating mode and the function range of the
AS Interface safety monitor ("Basic" or "Enhanced").
When the operating mode two dependent OSSDs is selected, the
second OSSD is dependent on the first OSSD.
In the Information about bus tab, you must enter the AS-Interface
bus addresses of the standard slaves used and the safety- oriented
AS-Interface slaves in this network.
Functional Example No. CD-FE-I-032-V10-EN 91
Ex.- No.
4.3