Safety Integrated - Industry - Siemens

Scenario: Manual reintegration
Disconnecting the F-DO and the switched on ACTUATOR indicator
light (simulated wire-break) a channel error, hence passivation,
is triggered. The PASSIVATION_ON indicator light is
switched on.
The F-DO is configured with "Passivate channels", therefore
not the entire F-DO is passivated, but only the affected channel.
This is made clear by the fact that the TEST indicator light
remains switched on.
After restoring the connection, the channel remains passivated,
the ACTUATOR indicator light remains switched off.
Overview for hardware setup
START_ACTUATOR
Button (NO)
PS
307
ACK_ESTP_ACTUATOR
Button (NO)
ACK_PASS_ACTUATOR
Button (NO)
CPU
315F
IM
151 HF
PM-E
(1)
An acknowledgement is requested from the user by switching
on the REQ_ACK_PASS_ACTUATOR indicator light.
After the user has acknowledged via the
ACK_PASS_ACTUATOR button, the passivation of the channel
is cancelled. The channel however remains switched off.
The ACTUATOR indicator light is only switched on again after
the user has additionally acknowledged START_ACTUATOR
button.
4 DI 4 DO PM-E
(2)
Wire-break
4/8 F-DI 4 F-DO
REQ_ACK_PASS_ACTUATOR PASSIVATION_ON REQ_ACK_ESTP_ACTUATOR
Light (white) Light (green) Light (white)
Meaning of background colors:
Green: Buttons and indicator lights for normal operation
Orange: Buttons and indicator lights for demonstration of passivation and reintegration
x
TEST
Light (yellow)
ACTUATOR
Light (yellow)
ESTP_ACTUATOR
Switch (NC/NC)
Functional Example No. AS-FE-I-011-V10-EN 329
Ex. No.
11