Safety Integrated - Industry - Siemens

Ex. -No.
4.3
Description Parameters
In the Diagnosis / Service tab you can adjust the settings for "Diagnosis
stop" and "Reset of error condition" as well as configure the AS-
Interface bus diagnosis.
Simulating slaves
If less than 4 safe or standard AS-Interface slaves are connected to the
AS-Interface bus, you must activate the control box Simulate slaves.
At least 4 slave addresses must be activated to ensure that the AS-Interface
safety monitor functions correctly.
Configuration of an AS-Interface safety monitor with asimon software
is graphic interactive, i.e. you can select and collectively configure
the safe AS-Interface slaves that are to be monitored and further
function devices from a symbol library that is classified according to
devices (left window).
92 Functional Example No. CD-FE-I-032-V10-EN