Safety Integrated - Industry - Siemens

Ex. No.
5
Operating instructions
The table below will help you during operation.
Operating instructions 1: Interrupting light curtain
No. Instruction Result/Note
1 Press the acknowledgement
push button ACK
2 Press the start push button
START
Operating instructions 2: Muting
Required before starting the
"machine". The 4 muting sensors
must be on "0" signal.
"Machine" running (simulated
by yellow indicator lights).
3 Interrupt the light curtain Yellow indicator light goes off
("machine" stops).
Note
During performing the following actions, please make
sure that the discrepancy times DISCTIM1 and DISCTIM2
as well as the maximum muting time TIME_MAX are not
exceeded. The allocation of the time values is available
in the F program (FB 1, network 1 when calling FB189).
No. Instruction Result/Note
1 Press the acknowledgement
push button ACK.
2 Press the start push button
START.
3 Switch the muting push button
MS_11 and keep it on
"1" signal.
4 Switch the muting push button
MS_12 and keep it on
"1" signal.
5 Switch the muting push button
MS_21 and keep it on
"1" signal.
6 Switch the muting push button
MS_22 and keep it on
"1" signal.
7 Switch the muting push button
MS_11 back to "0" signal.
8 Switch the muting push button
MS_12 back to "0" signal.
Required before starting the
"machine". The 4 muting sensors
must be on "0" signal.
"Machine" running (simulated
by yellow indicator light).
Muting sensor 1 of sensor pair 1
triggers.
Muting sensor 2 of sensor pair 1
triggers. The white muting
lamp indicates active muting
function. Interrupting the light
curtain does not cause a stop of
the "machine".
Muting sensor 1 of sensor pair 2
triggers.
Muting sensor 2 of sensor pair 2
triggers.
Muting sensor 1 of sensor pair 1
is released by the work piece.
Muting sensor 2 of sensor pair 1
is released by the work piece.
232 Functional Example No. AS-FE-I-005-V10-EN
No. Instruction Result/Note
9 Switch the muting push button
MS_21 back to "0" signal.
10 Switch the muting push button
MS_22 back to "0" signal.
Muting sensor 1 of sensor pair 2
is released by the work piece.
Muting is no longer active ->
The white muting lamp goes
off.
Muting sensor 2 of sensor pair 2
is released by the work piece.
Operating instructions 3: Wire break of the muting lamp
No. Instruction Result/Note
1 Press the acknowledgement
push button ACK.
2 Press the start push button
START.
3 Switch the muting push button
MS_11 and keep it on
"1" signal.
4 Switch the muting push button
MS_12 and keep it on
"1" signal.
5 Disconnect the connection
of the muting lamp from the
F-DO.
Required before starting the
"machine". The 4 muting sensors
must be on "0" signal.
Required before starting the
"machine". The 4 push buttons
(NC) for muting have to be on
"0" signal.
Muting sensor 1 of sensor pair 1
triggers.
Muting sensor 2 of sensor pair 1
triggers. The white muting
lamp indicates active muting
function. Interrupting the light
curtain does not cause a stop of
the "machine".
Wire break: "Machine" is
switched off.