Safety Integrated - Industry - Siemens

Input signal conditioning
The incoming operand AREA_PROTECTED can be linked to the
conditioned signal transmitted from one or several protective
doors (see page 452).
You can use, for example, the function block "F_SFDOOR"
from the Distributed Safety library to evaluate the signals
transmitted from a protective door:
Function block "SF_DOOR"
Depending on the respective application, the incoming operand
ENABLE_MOTION can be linked to the conditioned signal
of an acknowledgement button.
You can use, for example, the function block "EN_SW_1" from
the SIMATIC S7 F/P library to evaluate signals transmitted from
an acknowledgement button.
The block description of the SIMATIC S7 F/P V2.0 press safety
library provides a detailed description of this block.
Function block "EN_SW1"
In order to transmit the axis enable of the function block
"F_DRIVE" via the output parameter ENABLE_AXIS (see fig.) to
two outputs of a fail-safe output module, you have to link a
static variable such as ENABLE_AXIS to the output block.
The subsequent network links this static variable to the appropriate
outputs by means of parameter assignment.
Axis enable link
Function Example No. MC-FE-I-004-V11-EN 459
Ex. No.
4