09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

ut the flame temperature of the gas is only about 270° F (132.2° C), as compared <strong>to</strong> dia<strong>to</strong>mic hydrogen gas<br />

which is highly combustible and au<strong>to</strong>ignites at 560° C. A hydrogen/oxygen <strong>to</strong>rch flame is reportedly 3200° C<br />

(5792° F) However, the SG Gas flame melts metals easily, which indicates that it is likely that an oxygen is active.<br />

The gas flame also reduces ceramics, which indicates that the hydrogen is in an ionised state.<br />

SG Gas has an affinity for water and other liquids including fuels but it bubbles from the liquids after they reach a<br />

saturation point. One use of SG gas is infusing it back in<strong>to</strong> water <strong>to</strong> create ionised or polarised water.<br />

SG Gas is always a gas at room temperature while normal water vapour requires energy <strong>to</strong> evaporate in great<br />

quantities. When combusted, the gas always returns <strong>to</strong> liquid water. When placed in a balloon, the gas initially<br />

floats the balloon but it seeps from the balloon rather quickly indicating that the gas has a small molecular<br />

structure.<br />

One theory consistent with the properties observed is that no bonds of H 2 O are broken when the process of the<br />

invention is used, but that the combination of the electric and magnetic forces restructure the water molecule.<br />

Gauss' Law that states there are no monopoles in magnetism, only dipoles. It is well known that liquid water<br />

forms hydrogen bonds with other water molecules in order <strong>to</strong> remain in a liquid solution.<br />

Applying Gauss' Law <strong>to</strong> hydrogen, it has polar properties which open up a new configuration, one in which a<br />

hydrogen can be bound <strong>to</strong> another hydrogen and an oxygen. Upon exposure <strong>to</strong> an electric current, the<br />

electronegative strength of the oxygen a<strong>to</strong>m is weakened, allowing a hydrogen a<strong>to</strong>m <strong>to</strong> dislodge and magnetically<br />

bond <strong>to</strong> the other hydrogen a<strong>to</strong>m that is strengthened by the magnetic field. Hence, the electric and magnetic<br />

forces made possible a shift of a hydrogen molecule from H-O-H <strong>to</strong> O-H-H creating a dia<strong>to</strong>mic hydrogen molecule<br />

that is single bonded <strong>to</strong> a<strong>to</strong>mic oxygen. As the exposed oxygen is a reactive site on the gas molecule an<br />

appropriate name is “HHOhydrogen”. This structure predicts that the oxygen is now active and can oxidise<br />

metals. It predicts that in the unburned gaseous state, the increased negative charge causes greater spacing<br />

among the gas molecules causing stability, a lower boiling point, a lower freezing point, and a higher vapour<br />

pressure.<br />

The inven<strong>to</strong>rs have conceived of a new isomer of water - it contains the same a<strong>to</strong>ms, only in a different<br />

configuration and thus exhibits different properties from normal water vapour. The gas does not cluster <strong>to</strong> create<br />

liquid water at regular atmospheric temperatures and pressures as does the molecules of normal water vapour.<br />

The gas exists in a higher energy state, burns by itself at a low temperature, and melts any substrates when<br />

exposed <strong>to</strong> the gas flame. The gas flame has a uniform blue colour appearance without yellow sparks indicative<br />

of water (H 2 O) vapour or red sparks indicative of either H 2 or O 2 gas contamination. Hence, we call the resulting<br />

gas (SG Gas) an ionised gas or a plasma gas.<br />

Now referring <strong>to</strong> Fig.2 and Fig.3, a<strong>to</strong>ms shown are shown in their polar orientation for better understanding N<br />

meaning North Pole and S meaning South Pole. This dictates the orbital spin or magnetic flux. Fig.2 illustrates<br />

water prior <strong>to</strong> undergoing the process of the invention while Fig.3 illustrates the process and the believed effect<br />

on the aqueous fluid used.<br />

While the magnetic field orients the a<strong>to</strong>ms within the water molecule, the collapsing field induces a charge in the<br />

opposite direction and that dislodges the opposing hydrogen bond and allows it <strong>to</strong> bond <strong>to</strong> the other hydrogen<br />

a<strong>to</strong>m in the ortho position as depicted in Fig.3. Ortho-hydrogen is more reactive than para-hydrogen and<br />

produces much more energy.<br />

10 - 148

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!