09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

COP=1200, each household would receive on average, 255 watts, which might be just possible in 1939 when few<br />

appliances were electric. Anyway, Skinner’s impressive equipment could be driven by a single cot<strong>to</strong>n thread drive<br />

band while powering his whole workshop. It looked like this:<br />

This design has four nearly vertical shafts, each braced <strong>to</strong> give additional rigidity. These rotating shafts pass their<br />

rotating power <strong>to</strong> the mechanical output drive belt seen on the left. Each of these rotating shafts has a heavy<br />

weight in the form of a thick, short cylinder mounted high up near the <strong>to</strong>p of the shaft and what is probably an<br />

even heavier weight in the form of a long narrower cylinder attached near the bot<strong>to</strong>m of the shaft as seen just <strong>to</strong><br />

the right of the output drive belt. These four identical sets of shafts with their pairs of weights spin two or three<br />

times per second and produce the whole of the output power.<br />

As far as I am aware, Skinner never patented his design or disclosed how it worked. However, the operating<br />

principle is very simple indeed although it may take you a while <strong>to</strong> grasp how it works. You can check this out<br />

quite easily for yourself if you have access <strong>to</strong> an old-fashioned chair with four rigid legs like this:<br />

Tilt the chair over so that it is balanced on one leg. You will notice that almost no effort is involved in keeping it in<br />

that position as all of the weight is supported by the floor through just one of the legs. Now, move the <strong>to</strong>p of the<br />

chair by a very small amount and keep the <strong>to</strong>p of the chair in that position. You will notice two things: first, very<br />

4 - 60

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!