09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Fig.12b shows a schematic representation of the inner sta<strong>to</strong>r 2. The inner sta<strong>to</strong>r 2 is composed of the inner sta<strong>to</strong>r<br />

frame 12, the magnets 8 and the end caps 13. The magnets 8 are of equal length but their length is less than the<br />

length of the sta<strong>to</strong>r core 12. These magnets form the outer surface of the sta<strong>to</strong>r. They are seated in the grooves<br />

122 and held in position by the ribs 121. The first magnet 8-1 is inserted flush with the end cap 13. The other<br />

magnets 8 each have an axial offset V along the shaft axis 50 arranged so that there is an even stepping of the<br />

magnets with the final magnet 8-10 butting up against the second end plate 13. The axial offset V is the <strong>to</strong>tal<br />

overall gap W divided by (n - 1), where n is the number of magnets and so, V varies with the number of magnets<br />

used. In a typical arrangement, V is 5% of the length of the magnets 8.<br />

The end caps 13 have a diameter of 50 mm <strong>to</strong> 500 mm and a thickness of 5 mm <strong>to</strong> 20 mm. A typical length for<br />

the magnets 8 is 100 mm. The magnet dimensions are arranged so that when they are positioned in the grooves<br />

122, the inner sta<strong>to</strong>r 2 has a substantially uniform outer surface.<br />

Fig.13 shows an opened-out view of the outer surface of the inner sta<strong>to</strong>r 2. Here, ten magnets 8 are arranged<br />

with even spacing. The under side of the magnets taper in the direction of the shaft axis 50 and so they have a<br />

lesser width near the centre of the sta<strong>to</strong>r than they do at the outside surface. The first magnet 8-1 is positioned<br />

1 - 50

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!