09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

greater mass of beam A. If an additional, lightweight beam D is provided and counterbalanced by weight E, so<br />

that it has a very light upward pressure on its movement s<strong>to</strong>p F, then the operation should be self-sustaining.<br />

For this, the positions are adjusted so that when point C moves <strong>to</strong> its lowest point, it just nudges beam D slightly<br />

downwards. At this moment in time, weight B is at its closest <strong>to</strong> point C and about <strong>to</strong> start swinging away <strong>to</strong> the<br />

left again. Beam D being nudged downwards causes its tip <strong>to</strong> push weight B just enough <strong>to</strong> maintain its swinging.<br />

If weight B has a mass of “W” then point C of beam A has a downward thrust of 12W on Veljko’s working model.<br />

As the energy required <strong>to</strong> move beam D slightly is quite small, the majority of the 12W thrust remains for doing<br />

additional useful work such as operating a pump.<br />

Amr Al-Hossary’s Patent.<br />

If that is the case, then the design should perhaps be modified along the lines of the patent application of Amr Al-<br />

Hossary where the hinged plates are attached directly <strong>to</strong> the ro<strong>to</strong>r. That way, the plate lever arm definitely comes<br />

in<strong>to</strong> play:<br />

Here, the hinged arms or plates will also give an impact impulse when they open out <strong>to</strong> their full extent and that<br />

provides additional turning power. However, the imbalance between the two side is not a major amount and so<br />

this design is not likely <strong>to</strong> provide a large amount of <strong>to</strong>rque for driving external loads.<br />

4 - 32

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!