12.07.2015 Views

Navy Cash Standard Operating Procedures - Financial Management ...

Navy Cash Standard Operating Procedures - Financial Management ...

Navy Cash Standard Operating Procedures - Financial Management ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

. Set Terminal ID. The next requirement is to set a Terminal ID. Terminal IDs are 16digits long. The new Terminal ID will not be saved until the Device Setup is saved.0 Enter Terminal ID123 CLR=Clear OK=Done0 New Terminal ID1 xxxxxxxxxxxxxxxx2 Confirm OK=Yes3 CLR=NoThe first Terminal ID Entry screen will ask the user toenter a Terminal ID. The digits will be shown on line1 as they are entered. If CLR is selected, the digits arecleared, and the user can re-enter. If OK is selectedbefore any digit is entered, a message on line 2 willread “A value is required”. If OK is pressed before 16digits are entered, line 2 will read “16 digits required”.If OK is pressed after 16 digits have been entered, theConfirm screen will be shown. The new Terminal IDwill be shown on line 1. If CLR is selected, the firstterminal entry screen will be shown for re-entry. If theuser presses OK, the new Terminal ID will beassigned, and the K22 will return to the main menu.c. Device Setup Entry to Main Menu. When the K22 is booted up (after the first boot),the initial screen will be displayed showing the current Version and Build number of the K22software, where x.xx is the Version number and y is the Build. If the “5” Key is pressed, the K22will ask for the current Admin Password for entry into the Device Setup Screens. The AdminPassword is four digits long.0 Press 5 to enter1 admin mode23 V x.xx By0 Admin Mode1 Enter Password23 CLR=Cancel OK=DoneAs the Password is entered, it appears on line 2 asasterisks and “Cancel” will change to “Clear”. Oncethe Password has been entered, the user will select OKto continue. If CLR is pressed while characters are online 2, the data will be cleared. If there is nothing online 2, the K22 will reboot.0 Admin Mode1 Wrong Pin - Do you2 wish to try again?3 CLR=No OK=YesIf the Admin Password is entered incorrectly, the K22will ask if the user wishes to try again. Pressing OKwill return to the Enter Password Screen. PressingCLR will reboot the K22.NC SOP Ver 1.12 Chpt 2 K22 K80.doc 2-13 16-Aug-07

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!