Navy Cash Standard Operating Procedures - Financial Management ...

0 CONNECTIVITY ERROR1 CALL MAINTENANCE23This error indicates Serial Port communication cannot beactivated.0 LoadingConfigurations123The K80 is loading saved configurations.0 Device NotInitialized1 Call Administrator23The K80 is not initialized. See the Terminal ID entryscreen section.c. Terminal ID Entry Screen. When a K80 is initialized, it is necessary to enter a newTerminal ID for the K80. This can be done with the Terminal ID Entry Screens. These screenscan only be brought up when the K80 is booted with the door open. At all other times, it willeither not display the Terminal ID Entry Screens (if one has been entered previously) or it willdisplay the error “Device not Initialized Call Administrator” (if a Terminal ID has not been setpreviously).0 Press 5 to enter1 admin mode23 V x.xx ByThe first screen (shown on the left) allows the user toenter the Terminal ID Entry Screen. To enter the screen,press the 5 button. If the button is not pressed within 5seconds, the K80 will boot normally. Also displayed isthe current Version and Build number of the K80software. This is shown as “Vx.xx By” where x.xx is theVersion number and y is the Build number.NC SOP Ver 1.12 Chpt 2 K22 K80.doc 2-42 16-Aug-07