Navy Cash Standard Operating Procedures - Financial Management ...

2.3.8 Proxy Mode Setup ScreensAfter the mode is confirmed in the state selection screen, a menu for that particular mode isshown. If the proxy mode was selected, then the proxy mode menu will be displayed.0 1 Enforce User Logon123 OK=Main MenuIf “1” is selected, the “Enforce User Logon” screenwill be shown. If OK is selected in the Proxy modemenu, the K22 will return to the Main menu.a. Enforce User Logon Selection0 Current State:1 Do Not Force Logon2 Press 0 to Switch3 CLR=Cancel OK=Done0 Current State:1 Force Operator Logon2 Press 0 to Switch3 CLR=Cancel OK=DonePressing the “0” key toggles the K22 betweenrequiring a successful user logon before any otheraction can occur or not requiring a user logon.Pressing OK returns the K22 to the proxy mode menukeeping the currently selected setting. Pressing CLRreturns the K22 to the proxy mode menu withoutsaving the changes. ROM II and Navy Cash operatorIDs must match for sales receipts to be reportedproperly. However, even when ROM II and NavyCash are integrated, "Enforce User Logon" must beset to "Do Not Force Logon".2.3.9 Normal Mode Setup ScreensAfter the mode is confirmed in the state selection screen, a menu for that particular mode isshown. If the normal mode is selected, then the normal mode menu will be displayed.0 1 Merchant1 2 Event2 3 Amount3 OK=Main MenuIf “1” is selected, the “Merchant Entry” screen will beshown. If “2” is selected, the “Event Entry” screenwill be shown. If “3” is selected, the “Amount Entry”screen will be shown. If OK is selected in the normalmode menu, the K22 will return to the Main menu.NC SOP Ver 1.12 Chpt 2 K22 K80.doc 2-16 16-Aug-07