Navy Cash Standard Operating Procedures - Financial Management ...

0 1 Password1 2 Terminal ID2 3 State3 CLR=Cancel OK=SaveOnce the Admin Password has been entered correctly,the Main Menu will be shown. If OK is pressed, theSave Screen will be shown for confirmation. If CLR ispressed, nothing is saved, and the K22 reboots. If “1”is pressed, the Password Change Screens will beshown. If “2” is pressed, the Terminal ID ChangeScreen will be shown. If “3” is pressed, the StateScreen is shown.d. Admin Password Entry Screens. When entered, the first screen will ask the user toenter a new Admin Password. The password must be four digits long. The new password will notbe fully changed until the Device Setup is saved.0 Enter new1 Admin Password23 CLR=Cancel OK=DoneAs the password is entered, a series of asterisks willshow on line 2, and “Cancel” will change to “Clear”.If CLR is pressed while line 2 is blank, the device willreturn to the Main Menu. If pressed after enteringdigits, the digits will be cleared. If OK is pressed after4 digits have been entered, the next screen will ask forthe new password to be reentered. If OK is pressedbefore four digits are entered, line 3 will read “4 digitsrequired”.0 Re-enter new1 Admin Password23 CLR=Cancel OK=DoneAs the password is reentered, it will show a series ofasterisks on line 2. If CLR is pressed while line 2 isblank, the device will return to the Main Menu. Thelast confirmed value will be retained, and the mostrecently entered value will be discarded. If CLR ispressed after entering digits, the digits will be cleared.If pressed before four digits are entered, line 3 willread “4 digits required”. After the password has beenreentered and the OK key is pressed, the device willreturn to the Main Menu.NC SOP Ver 1.12 Chpt 2 K22 K80.doc 2-14 16-Aug-07