2002 Swinburne TAFE Handbook - Swinburne University of ...

166 I Subject Details
Aims & Objectives
Competency is demonstrated by removing furniture from a nominated door and a
nominated windowforthe purpose of painting and replacing and refitting doors/shutters
where applicable.
BCG2012A Make Out Sets
• Prerequisite: Nil
Aims & Objectives
Competency is demonstrated by making a set out complete and accurate in detail, from
which parts/components of a unit can be produced and marked.
BCG3009A Construct and Install Non-load
Bearing Internal Partition Wall
16 nominal Hours· Prerequisite: BGGI 016A, BGG2000A
Aims & Objectives
Competency is to be demonstrated by the performance of setting out, constructing and
installing a partition wall to a design.
BCG3010A Install Windows to Wall framing
12 nominal Hours· Prerequisite: BGGI 005A, BGG100BA, BGG2004A • Assessment:
Gompetency is to be demonstrated by the performance of installing both a timber
window frame and an aluminium window frame to a framed wall. In one situation the
wall frame is to be of timber and the other of metal.
BCG3011A Carry Out Basic Setting Out
12 nominal Hours· Prerequisite: BGG1003A, BGG1015A, BGG2004
Aims & Objectives
Competency is to be demonstrated by the performance of setting out and establishing
hurdles/profiles and building lines for a nominated 'L shaped building on a building block.
BCG3012A Construct and ErectTimber Wall
framing
40 nominal Hours. Prerequisite: BGG1002A, BGGI 003A, BGG1005A, BGG1006A,
BGG100BA, BGG1016A, BGG2000A
Aims & Objectives
Competency is to be demonstrated by the performance of setting out, constructing and
erecting walls for a nominated building involving door and window openings and at least
one internal wall.
BCG3013A Erect Ceiling framing (Pitched
Roof)
• Prerequisite: BGG1016A, BGG3012A
Aims & Objectives
Competency isto be demonstrated by the performance of setting out and installing
ceiling framing for a nominated projectto involve a hip and valley roof.
BCG3014A ErectTimber Pitched Roof framing
40 nominal Hours· Prerequisite: BGGI 016A, BGG3012A, BGG3013A
Aims & Objectives
Competency is to be demonstrated by the performance of setting out, cutting and
erecting a pitched rooffor a nominated roof structure incorporating hips, valleys and a
gable end.
BCG3016A Install Sub-Floor Framing
24 nominal Hours· Prerequisite: GGI 003A, BGGI 005A, BGG100BA, BGG10llA
Aims & Objectives
Competency is to be demonstrated by the performance of installing bearers and joists
or ladderframes for sub-floorframing to a nominated building project.
BCG3017A Install Timber and Sheet Flooring
B nominal Hours· Prerequisite: BGGI003A, BGG1004A, BGGI005A, BGGI006A,
BGG1016A, BGG3016A
Aims & Objectives
Competency is demonstrated by the performance of installing two separate floors to
nominated areas, one of tongued and grooved flooring boards and the other of sheet
flooring.
BCG3018A Erect Steel Roof Trusses
24 nominal Hours· Prerequisite: BGG1006A, BGG2006A, BGG3019A
Aims & Objectives
Competency isto be demonstrated by the performance of erecting and installing a steel
rooftruss structure to a nominated roof plan.
BCG3019A Construct and Erect Steel Wall
Framing
40 nominal Hours· Prerequisite: BGGI 006A, BGG2006A
Aims & Objectives
Competency is to be demonstrated by the performance of erecting a steel wall framing
for a nominated building involving door and window openings.
BCG3020A Construct Timber Roof Structures -
Irregular Roofs
40 nominal Hours· Prerequisite: BGG3012A, BGG3015A
Aims & Objectives
Competency is to be demonstrated by the performance of erecting an irregular roof
structure to a nominated roof plan.
BCG3021A Install Door Frames
8 nominal Hours· Prerequisite: BGGI 002A, BGGI 005A, BGGI OOM BGGI 016A,
BGG2004A
Aims & Objectives
Competency is demonstrated by the performance of installing a door frame to a
nominated project of a structure.
BCG3022A Finish Eaves
12 nominal Hours· Prerequisite: BGG1005A, BGG1001A, BGG1016A, BGG2004A
Aims & Objectives
Competency is to be demonstrated by the performance of constructing and finishing at
least two separate eaves designs .
BCG3023A Install Exterior Cladding
36 nominal Hours· Prerequisite: BGGI 001 A, BGGI 016A, BGG3021A, BGG301 OA
Aims & Objectives
Competency is demonstrated by the performance of installing at least two types of
material finishes to nominated external wall surfaces. One isto be of horizontal boards
and the other of sheeted material.
BCG3024A ConstructTimber External Stairs
36 nominal Hours· Prerequisite: BGGI 003A, BGGI 016A, BGG3016A
Aims & Objectives
Competency is to be demonstrated by the safe and effective assembly and erection of
timber external stairs covering one flight and a landing, including handrail or balustrade.
BCG3025A Install External or Internal Doors
40 nominal Hours· Prerequisite: BGGI 005A, BGG1008A, BGG2004A
Swinburne University of Technology I TAFE Handbook 2002