2002 Swinburne TAFE Handbook - Swinburne University of ...

Subject Details I 191
Keys.
Splines.
Pins.
Rigid couplings.
Belt drive.
Chain drive.
Drive shaft selection and sizing.
Theory of brakes and clutches.
Theory of spur.
Helical and bevel gear drive.
Fatigue failure analysis.
EB702 Dynamics of Industrial Machines
40 nominal Hours· Prerequisite: EA001, £8770
Content
Topics include:
Simple harmonic motion.
Free vibration.
Forced vibration.
Damped vibration.
Balancing and static balance measurement.
Vibration measurement.
Static balance apparatus.
Vector analysis of velocity and acceleration of mechanisms.
Simple and compound gears.
Epicyclic gears.
EB703 Machine Design
40 nominal Hours· Prerequisite: EA772
Content
Topic include:
Drive shaft materials.
Tensile, shear and bending strength.
Fatigue.
Stress raisers and endurance.
Rigid couplings.
Keys sat screws.
Pins.
Use of manufactures catalogues for vee belts.
Chain, universal and directflexible couplings.
Spur, helical, and bevel gear drives.
Electric motors.
Reduces and prime movers.
EB704 Mechanical Design
40 nominal Hours· Prerequisite: £8711- EA772, £8703
Content
Introduction.
Levers.
Keys and splines.
Couplings.
Joumal bearing.
Rolling contact bearings.
Bolted connections.
Welded connections.
Helical springs (round wire).
Translation screws.
EB709
40 nominal Hours· Prerequisite: EA715
Aims & Objectives
Mechatronics 4 (Analog
Automation)
This module takes the process model completed in EA715, connects and conditions the
sensors and actuators and then automates it. The module adds at least 2 analog inputs
and 1 analog output using a PC interface or PLC, and carry out an arithmetic calculation
which conditions the output dependent upon the input/so
EB711 Thermodynamics 2
• Prerequisite: EA714
Content
Topic include heattransfer, combustion and fuels, steam, refrigeration/heat pump.
EB720 Fluid Mechanics 2
40 nominal Hours· Prerequisite: EA706
Content
Topics include:
Reynolds number and flow regime.
Characteristics of laminar.
Turbulent and mixed (transition) flow.
Head loss in pipes and fittings.
Pipe networks.
Fluid machinery and pumping systems.
EB722 Computer Based Modelling -
Design and Drafting
60 nominal Hours. Prerequisite: EA705
Content
An overview of the different types of 3 dimensional computer aided modelling
techniques. This subject also covers applications software for use in engineering
design, manufacturing, marketing, product design and simulation.
EB770 Robotics 2
40 nominal Hours· Prerequisite: Nil
Content
Includes industrial robot selection, robot installation, interfacing, robot sensors, trouble
shooting and diagnostics, maintenance, advanced programming.
EB771
40 nominal Hours· Prerequisite: EA772
Content
Topics include:
Friction.
Band brakes, clutches.
Belt drives and power screws.
Centrifugal forces.
Advanced Dynamics
Static and dynamic balance of unbalanced masses on shafts and flywheels.
Simple and transmissibility.
Direct central impact.
Accelerating bodies.
Work energy method.
Swinburne University of Technology I TAFE Handbook 2002