5cjxburmr

• the method of identifying the explosive ordnance including color, size, and shape, andother relevant markings; and• the method for safe disposal of the explosive ordnance. 477This information may be drawn from the information recorded and retained when usingexplosive ordnance. 4786.20.6.5 Best Practices for the Content of Released Information on AXO. Thebest practice is for the released information on AXO to contain details on:• the location of the AXO;• the approximate number of AXO at each specific site;• the types of AXO at each specific site;• the method of identifying the AXO, including color, size, and shape;• information on type and methods of packing for AXO;• the state of readiness; and• the location and nature of any booby traps known to be present in the area of AXO. 479This information may be drawn from the information recorded and retained whenabandoning explosive ordnance. 4806.20.7 Clearance, Removal, or Destruction of Explosive Remnants of War FromTerritory Under a Party’s Control. After the cessation of active hostilities and as soon asfeasible, each Party to the CCW Protocol V on Explosive Remnants of War and party to anarmed conflict shall mark and clear, remove, or destroy explosive remnants of war in affected477 TECHNICAL ANNEX TO CCW PROTOCOL V ON EXPLOSIVE REMNANTS OF WAR part 1(c)(i) (“On UXO the releasedinformation should contain details on: (1) the general location of known and probable UXO; (2) the types andapproximate number of explosive ordnance used in the targeted areas; (3) the method of identifying the explosiveordnance including colour, size and shape and other relevant markings; (4) the method for safe disposal of theexplosive ordnance.”).478 Refer to § 6.19.2 (Using Explosive Ordnance); § 6.19.4 (Storing Records on the Use or Abandonment ofExplosive Ordnance).479 TECHNICAL ANNEX TO CCW PROTOCOL V ON EXPLOSIVE REMNANTS OF WAR part 1(c)(i) (“On AXO the releasedinformation should contain details on: (5) the location of the AXO; (6) the approximate number of AXO at eachspecific site; (7) the types of AXO at each specific site; (8) the method of identifying the AXO, including colour,size and shape; (9) information on type and methods of packing for AXO; (10) state of readiness; (11) the locationand nature of any booby traps known to be present in the area of AXO.”).480 Refer to § 6.19.3 (Abandoning Explosive Ordnance); § 6.19.4 (Storing Records on the Use or Abandonment ofExplosive Ordnance).407