Volume-II of IV - GAIL

MECON LIMITED
Delhi
PROCESS & PIPING
DESIGN SECTION
TECHNICAL SPECIFICATION
FOR
PLUG VALVES
TECHNICAL SPECIFICATION NO. : MEC/TS/05/62/003 REV-2 Page 13 of 13
11.0 GUARANTEE
11.1 Manufacturer shall guarantee that the materials and machining of valves and fittings
comply with the requirements in this specification and in the Purchase Order.
11.2 Manufacturer is bound to replace or repair all valve parts which should result defective
due to inadequate engineering or to the quality of materials and machining.
11.3 If valve defect or malfunctioning cannot be eliminated, Manufacturer shall replace the
valve without delay.
11.4 Any defect occurring during the period of Guarantee shall be attended to by making all
necessary modifications and repair of defective parts free of charge to the Purchaser as
per the relevant clause of the bid document.
11.5 All expenses shall be to Manufacturer’s account.
D:\old data\FATEH\MP Region\Kailaras\Tender RFQ\Plug Valves\Plug Valves - 003 - TS-R2.doc