Volume-II of IV - GAIL

MECON LIMITED
Delhi
PROCESS & PIPING
DESIGN SECTION
TECHNICAL SPECIFICATION FOR
TEMPORARY CATHODIC
PROTECTION SYSTEM
TECHNICAL SPECIFICATION NO. : MEC/TS/05/62/016A REV-1 Page 14 of 19
9.4 Owner reserves the right to ask for inspection of all or any item under the contract
and witness all tests and carry out inspection or authorise his representative to
witness test and carry out inspection. CONTRACTOR shall notify the OWNER or
OWNER's representative at least 20 days in advance giving exact details of tests, dates
and addresses of locations where the tests would be carried out.
10.0 PACKING AND TRANSPORT
All equipment/material shall be protected for inland/marine transport, carraige at site
and outdoor storage during transit and at site. All packages shall be clearly, legibly
and durably marked with uniform block letters giving the relevant equipment/material
details. each package shall contain a packing list in a water proof envelope. Copies of
the packing list in triplicate, shall be forwarded to owner prior to despatch. All items of
material shall be clearly marked for easy identification against the packing list.
11.0 SYSTEM TESTING, COMMISSIONING AND INTERFERENCE MITIGATION
11.1 System testing at site
11.1.1 Contractor shall furnish the detailed field testing and commissioning procedure for
approval. Field tests as per the approved procedures shall be carried out on the
equipment/systems before being put into service. the acceptance of the complete
installation shall be contingent upon inspection and field test results.
11.1.2 Before the CP facilities are placed in operation all necessary tests shall be carried out
to establish that all equipment, devices, wiring and connection, etc., have been
correctly installed, connected and are in good working condition as required for
intended operation.
11.1.3 Owner/owner's representative may witness all the tests. At least one week's notice
shall be given before commencing the tests.
11.1.4 All tools, equipments and instruments required for testing shall be provided by
CONTRACTOR.
11.1.5 Generally following tests shall be carried out and recorded in proforma given in
subsequent clauses:
Checking : Visual inspection, comparison with
drawings and specifications.
Inspection : Detailed physical inspection
Testing : Simulation tests of equipment to
determine its operational fitness.
D:\old data\FATEH\MP Region\Kailaras\Tender RFQ\TCP&PCP\Temporary Cathodic Protection - 016A-R1.doc