Volume-II of IV - GAIL

MECON LIMITED
REGD. OFF : RANCHI (BIHAR)
PROCESS & PIPING
DESIGN SECTION
NEW DELHI
STANDARD SPECIFICATION
TITLE WELDING OF ONSHORE GAS
SPECIFICATION NO. PAGE 36 OF 48
PIPELINES
MEC/S/05/62/02 REVISION
16.12 Equipment and Accessories
16.12.1 CONTRACTOR shall make necessary arrangement at his own expense, for
providing the radiographic equipment, radiographic film and all the accessories
for carrying out the radiographic examination for satisfactory and timely
completion of the job.
16.12.2 For carrying out the mainline radiographic examination the CONTRACTOR shall
be equipped with suitable mobile/ stationary type dark rooms.
These shall have all the required facilities for film processing. Film viewer used
shall be equipped with the film illuminator that has a light source of sufficient
intensity and suitably controlled to allow viewing film densities upto 4.0 without
damaging the film.
16.13 Radiation Protection
16.13.1 CONTRACTOR shall be responsible for the protection and personnel monitoring
of personnel with or near radiation sources.
16.13.2 The protection and monitoring shall comply with local regulations.
16.13.3 In view of visual hazards in the handling of Radioactive source of material,
CONTRACTOR shall be solely responsible for complying with all rules and
regulations set forth by Atomic Energy Commission or any other Government
agency of India in this regard and COMPANY shall not be responsible and shall
be kept indemnified by the CONTRACTOR for default (s) of whatever nature by
the CONTRACTOR. Safety equipment as considered adequate by the
COMPANY for all necessary personnel shall be made available for use and
maintained for immediate and proper use by the CONTRACTOR.
16.14 Display of Safety Instructions
16.14.1 The safety provisions shall be brought to the notice of all concerned by display on
a notice board at a prominent place at the work spot. The person responsible for
the "safety" shall be named by the CONTRACTOR.
\\Akjha\work contrac\standard TS for Pipe Line WC (Vol-II) MASTER FOLDER\02A welding onshore gas pipeline\Welding of Onshore Gas Pipelines with addendum - I 02A.doc