Cortex-A8 Technical Reference Manual - ARM Information Center

[7:6] - Remaps {TEX[0],C,B} = b011
b10 = reset value
[5:4] - Remaps {TEX[0],C,B} = b010
b10 = reset value
[3:2] - Remaps {TEX[0],C,B} = b001
b01 = reset value
[1:0] - Remaps {TEX[0],C,B} = b000
b00 = reset value
Table 3-114 shows the encoding of the remapping for the primary memory type.
Figure 3-52 shows the bit arrangement of the Normal Memory Remap Register.
System Control Coprocessor
Table 3-113 Primary Region Remap Register bit functions (continued)
Bits Field Function a
a. The reset values ensure that no remapping occurs at reset.
b. Shareable attributes can map for both shared and nonshared memory. If the
shared bit read from the TLB or translation tables is 0, then the bit remaps to
the nonshared attributes in this register. If the shared bit read from the TLB or
translation tables is 1, then the bit remaps to the shared attributes of this
register.
Table 3-114 Encoding for the remapping of the primary memory type
Encoding Memory type
b00 Strongly ordered
b01 Device
b10 Normal
b11 UNP (Normal)
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
- - - - - - - - - - - - - - - -
Figure 3-52 Normal Memory Remap Register format
Table 3-115 shows how the bit values correspond with the Normal Memory Remap Register
functions.
Table 3-115 Normal Memory Remap Register bit functions
Bits Field Function a
[31:30] - Remaps outer attribute for {TEX[0],C,B} = b111
b01 = reset value
[29:28] - Remaps outer attribute for {TEX[0],C,B} = b110
b00 = reset value
[27:26] - Remaps outer attribute for {TEX[0],C,B} = b101
b01 = reset value
ARM DDI 0344K Copyright © 2006-2010 ARM Limited. All rights reserved. 3-102
ID060510 Non-Confidential