Dokument 1.pdf (35.736 KB) - RWTH Aachen University

9. Literaturverzeichnis
210
Materialprüfung im DIN Deutsches Institut für Normung e.V., Deutsche Fassung EN
1011-2:2001
[DIN05] DIN EN 10 025 Teil 1-6: Warmgewalzte Erzeugnisse aus Baustählen, Normenausschuss
Materialprüfung im DIN Deutsches Institut für Normung e.V., Februar 2005
[EUR01] Eurocode 3: Design of steel structures; Part 1-10: Selection of materials for throughthickness
properties and fracture toughness, January 2001
[FAS02] FAST: Fracture Avoidance in Laser Welded Thick Structural Steel Plates with Yield
Strength between 235and 890 MPa. EGKS-Projekt F5.02/99
[FIT06] FITNET – European Fitness-for-service Network, 2006
[FUH07] Fuhrmann, C.: Laser-Lichtbogen-Hybrid-schweißen bis zu Blechdicken von 25 mm,
Diss. RWTH Aachen, Shaker Verlag, 2007
[GAO98] Gao, X.; Ruggieri, C.; Dodds, R.H.: Calibration of Weibull stress parameters using
fracture toughness data. Int. J. Fract. 92 (1998), S. 175-200
[GOL93] Gologanu, M.; Leblond, J.; Devaux, J.: Approximate models for ductile metals
containing non-spherical voids – Case of axisymmetric prolate ellipsoidal cavities, J.
Mech. Phys. Solids 41 (1993), S. 1723-1754
[GOL94] Gologanu, M.; Leblond, J.; Devaux, J.: Approximate models for ductile metals
containing non-spherical voids – Case of axisymmetric oblate ellipsoidal cavities, Trans.
ASME, J. Engng. Mat. Tech. 116 (1994), S. 290-297
[GUR77] Gurson, A.L.: Continuum theory of ductile rupture by void nucleation and growth: part
I-yield criteria and flow rules for porous ductile media, J. Engng. Mater. Tech., Vol. 99,
(1977), S. 2-15
[HAF07] Haferkamp, H.; Meier, O.; Boese, B.; Mittelstädt, R.; Kuscher, G.: Laser-MSG-
Hybridschweißen von innovativen Stahlwerkstoffen, Forschungsvorhaben P 613 (AiF-
Nr. 14114 N), 2007
[HAN76] Hancock, J.W.; Mackenzie, A.C.: On the Mechanisms of Ductile Failure in High-
Strength Steels Subjected to Multi-Axial Stress States. J. Mech. Phys. Solids, (1976),
Vol. 24, S. 147-169
[HAN93] Hancock, J.W.; Reuter, W.G.; Parks, D.M.: Constraint and Toughness Parameterized by
T. Hackett E.; Schwalbe H.-H.; Dodds R.H. editors; Constraint Effects in Fracture,
ASTM STP 1256. Philadelphia, PA, USA: American Society of Testing and Materials,
1995, S. 142-177