Dokument 1.pdf (35.736 KB) - RWTH Aachen University

9. Literaturverzeichnis
[KUC05] Kuckertz, C.: Korrelation der Ergebnisse des Aufschweißbiegeversuchs an Stahl
S355J2G3 mit Prüfverfahren nach europäischen Produktnormen, Diss. RWTH Aachen,
Shaker Verlag, Band 2/2005, 2005
[LEI99] Lei, W.-S.: Statistics of Brittle Fracture under Multiaxial Loading, Diss. RWTH Aachen,
Shaker Verlag, Band 4/99, 1999
[LLO97] Lloyds Register of Shipping. Giudelines for the approval of CO2 laser welding.
Technical report, 1997
[MAR76] Marandet, B.; Sanz, G.: Étude par mécanique de la rupture de la ténacité d’aciers à
résistance moyenne fournis en forte épaisseur. Revue de Métallurgie (1976), S. 359-383
[MAT00] Matos, C.G.; Dodds R.H.: Modeling the effects of residual stresses on defects in welds
of steel frame connections. Engng. Struct. 22 (2000), S. 1103-1120
[MER02] Merkert, G.: Anwendung und Weiterentwicklung von schädigungsmechanischen
Ansätzen zur Simulation des Versagens von Thermoschockproben, Dissertation an der
Fakultät Maschinenbau Universität Stuttgart, 2002
[MIL86] Milne, I.; Ainsworth, R.A.; Dowling, A.R.; Stewart, A.T.: Assessment of the Integrity of
Structures Containing Defects. British Energy, R/H/R6-Revision 3, 1986
[MIN92] Minami, F.; Brückner-Foit, A.; Munz, D.; Trolldenier, B.: Estimation procedure for the
Weibull parameters used in the local approach. Int. J. Fract. 54 (1992), S. 197-210
[MIN06] Minami, F.; Ohata, M.; Shimanuki, H.; Handa, T.; Igi, S.; Kurihara, M.; Kawabata, T.;
Yamashita, Y.; Tagawa, T.; Hagihara, Y.: Method of constraint loss correction of CTOD
fracture toughness for fracture assessment of steel components. : Estimation procedure
for the Weibull parameters used in the local approach. Engng. Fract. Mech. 73 (2006), S.
1996-2020
[MOO03] Moore P.L.: Investigations into the microstructure and properties of lase and laser/arc
hybrid weld in pipeline steels, University of Cambridge PhD Thesis, 2003
[MUD87] Mudry, F.: Etude de la rupture ductile et de la rupture par clivage d’aciers faiblement
allies, Dissertation, Ecole des Mines, Paris, 1982
[NEE87] Needleman, A.; Rice, J.R.: Limits to ductility set by plastic flow localisation, Mechanics
of sheet metal forming, D. P. Koistinen (editor), Plenum Press, New York, (1978), S.
237-267
[NEE87-1] Needleman, A.; Tvergaard, V.: An analysis of ductile rupture modes at a crack tip. J.
Mech. Phys. Solids, Vol. 35, (1987), S. 151-183
[NEE87-2] Needleman, A.: A continuum model for void nucleation by inclusion debonding. J.
Appl. Mech.-Trans. ASME 54 (1987), S. 525-531
212