Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

Rexroth IndraDrive Mounting and Installation 6-69
DOK-INDRV*-FU*********-IB01-EN-P
Note: Please observe that the contact bars of the basic accessories
HAS01 are used for connection to the drive controller to the
left side.
Applications
The HAS01 accessories are used to
• fasten the drive controllers on a mounting surface,
• interconnect the DC bus connections of drive controllers,
• connect the 24V supply of drive controllers of the
Rexroth IndraDrive M range,
• establish the connection of the equipment grounding conductors from
drive controller to drive controller or supply module,
• increase the current carrying capacity of the contact bars in the DC
bus.
Scope of Supply
The basic accessories HAS01 without contact bars is contained in the
standard scope of supply of the HCS02 drive controllers.
Further Accessories
Note: You find a complete overview of available accessories in the
Project Planning Manual "Rexroth IndraDrive Drive System".