Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

Rexroth IndraDrive Commissioning and Parameterization 7-27
DOK-INDRV*-FU*********-IB01-EN-P
Enter Motor Data:
At the beginning of parameterization you must enter the motor data (see
type plate of motor).
Data field in which you can make inputs is highlighted in black.
Fig. 7-19: Enter motor data (example)
List
element
Characteristic
value of motor Unit Definition
0 rated current Aeff rms value of the electric current in
the motor feed wire (motor phase) at
rated load
1 rated voltage Veff rms value of the phase-to-phase
voltage between the motor terminal
pins at rated load
2 rated frequency Hz frequency of the feeding, sinusoidal
electric voltage
3 rated speed 1/min speed of motor output shaft at rated
load
4 power factor cos φ 1 power factor at rated load
5 rated power kW mechanical power that can be
continuously delivered at rated load
Fig. 7-20: List elements P-0-4032
• Data field in which you can make inputs is highlighted in black.
• With key ▲ or ▼ you can select a specific data field.
• With keys ◄, ►, Prog + , ⎺Mon enter desired value:
◄, ►: move cursor to the left or to the right
Prog + , ⎺Mon: change setting
• With Enter key confirm entered value.
Next data field is automatically activated.
• When you have made all inputs:
Press Esc key.