Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

Rexroth IndraDrive Mounting and Installation 6-71
DOK-INDRV*-FU*********-IB01-EN-P
Mounting the Parts "Bar" and "End Piece" from the HAS01
Accessories
The parts "bar" and "end piece" increase the current carrying capacity of
the DC bus connection by reducing the involved contact resistances.
1: bar
2: end pieces (right end)
3:: end pieces (left end)
Fig. 6-96: Mounting bar and end piece from HAS01
• Ad 1: Use the bars contained in all HAS01.1-***-072-** at L+ and L- as
illustrated above.
• Ad 2 and 3: Use the end pieces contained in all HAS01.1-350-***-**
and HAS01.1-200-***-** at the right and left ends of the DC bus
connections in the drive system.