Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

7-72 Commissioning and Parameterization Rexroth IndraDrive
Function
Function
Function
Function
Function
This parameter displays the current states of the digital inputs. This
means that the current signal level or switch status (only for MP*02VRS!)
is displayed.
The table below illustrates the different significance of the individual bits
depending on control section and firmware:
P-0-0304, Digital I/Os, outputs
Input min/max: Default value: Unit:
MPB: --- / --- --- --
This parameter displays the states of the digital outputs and relay outputs.
This means that the current signal level or switch status is displayed; the
following cases have to be distinguished for inputs/outputs that can be
switched:
• With configuration as output, the output signal status is displayed in
P-0-0304.
• With configuration as input, the input signal status is displayed in
P-0-0303, Digital I/Os, inputs.
Note: Configuration takes place via P-0-0302, Digital I/Os,
direction.
See also Functional Description "Digital Inputs/Outputs"
P-0-0414, Analog Output 3
Input min/max: Default value: Unit:
MPB: -10,000 / 10,000 0,000 V
This parameter indicates the voltage value that is output via the analog
output 3 of the drive controller.
See also Functional Description "Analog Outputs"
P-0-0415, Analog Output 4
Input min/max: Default value: Unit:
MPB: -10,000 / 10,000 0,000 V
This parameter indicates the voltage value that is output via the analog
output 4 of the drive controller.
See also Functional Description "Analog Outputs"
P-0-0416, Analog Output 5
Input min/max: Default value: Unit:
MPB: -10,000 / 10,000 0,000 V
This parameter displays the voltage value that is output via the analog
output 5 of the drive controller.
DOK-INDRV*-FU*********-IB01-EN-P