02.02.2013 Views

Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

6-12 Mounting and Installation <strong>Rexroth</strong> <strong>Indra<strong>Drive</strong></strong><br />

Dimensions – Standard Braking Resistors HLR01.1<br />

1)<br />

1 2<br />

123<br />

75<br />

Note: The standard braking resistors are intended to be mounted<br />

above the drive controllers HCS03; otherwise, forced<br />

convection (blower) with a volume stream of 200 m³/hour is to<br />

be provided.<br />

275<br />

19,5<br />

(M6)<br />

300<br />

165<br />

196<br />

235<br />

MBZU0032EN00.FH9<br />

Fig. 6-12: Dimensional drawing braking resistor HLR01.1N-0300-N17R5-A-<br />

007-NNNN<br />

DOK-INDRV*-FU*********-IB01-EN-P

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!