Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

6-82 Mounting and Installation Rexroth IndraDrive
PE
PE
PE
X3 L3
L2
L1
Shield Connection of Power
Supply Cable HAS02.1-007-NNN-
NN with Mains Filter Mounted
L1 L2 L3 PE
shielding plate
support
clip
MBZU0013EN01.FH9
Fig. 6-106: Shielding plate HAS02.1-006-NNN-NN at the bottom of the mains
filter (nominal current 50 A)
3. Fix shield of motor cable to shielding plate with a clip.
Note: The shield terminals must not be used to provide strain relief.
1. Hang up support at bottom of mains filter and fasten it by means of
supplied screws.
2. Screw shielding plate of power supply cable to support.
According to required power supply cable routing, it is possible to mount
shielding plate in different positions:
• power supply cable routed in parallel or,
• 45° to bottom of mains filter or,
• 90° to bottom of mains filter.
DOK-INDRV*-FU*********-IB01-EN-P