Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

7-14 Commissioning and Parameterization Rexroth IndraDrive
Editing Mode
Keys
The comfort control panel in particular supports the commissioning of
asynchronous third-party motors – another commissioning tool is not
required for this purpose. The required steps are given by the display, the
corresponding input is made by means of the keys of the control panel.
The editing mode is the status in which you can enter or change values by
pressing the key Prog + or ⎺Mon at the control panel. The corresponding
field of the value then is highlighted in black on the display. To have the
value applied by the drive press the Enter key. If you do not want to apply
changed values, press the Esc key. By doing this you exit the editing
mode. The corresponding field then no longer is highlighted in black.
Key Function
• return to previous menu item (without applying possibly
changed values)
• exit editing mode (without applying possibly changed
values)
• reset error
Fig. 7-4: Keys
• Editing mode: reduce value
• Motor potentiometer: reduce speed
• go to monitor mode
• Editing mode: increase value
• Motor potentiometer: increase speed
Editing mode: apply displayed value
arrow key (e.g. navigation up)
arrow key (e.g. navigation down)
arrow key (e.g. navigation to previous display mask, cursor
to the left)
arrow key (e.g. navigation to subsequent display mask,
cursor to the right)
DOK-INDRV*-FU*********-IB01-EN-P