Rexroth IndraDrive C Drive Controllers HCS02.1 ... - Bosch Rexroth

Rexroth IndraDrive Electrical Data 5-3
CSB01.1N-FC… IEIN3 A 1,5 (pulse width tEIN3lade ca. 120 ms)
CSB01.1N-PB… IEIN3 A 5 (pulse width tEIN3lade ca. 40 ms)
Power consumption of optional modules according to type code 3), 4)
C PN3 W 1,0
EN1 PN3 W 6,0
EN2 PN3 W 5,5
ENS PN3 W 5,5
MA1 PN3 W 2,0
MD1 PN3 W 1,0
S PN3 W 1,0
Power Voltage Supply- Mains Connection
DOK-INDRV*-FU*********-IB01-EN-P
1) plus control section with optional modules
2) plus optional modules
3) code from the control section type code
4) at max. allowed output load without circuits to be supplied externally
Fig. 5-2: Control voltage
Designation Symbol Unit HCS02.1E HCS03.1E
allowed range of mains input
voltage, three-phase;
TN-S, TN-C, TT mains
allowed range of mains input
voltage, three-phase;
IT mains
allowed range of mains input
voltage, single-phase
ULN
ULN
V
V
3 * AC (200…500)
+-10%
3 * AC (200…230)
+-10%
3 * AC (400…500)
+10% -15%
not allowed
ULN V 1 * AC (200…250) +-10% not allowed
rotary field no rotary field condition
allowed range of mains
frequency
max. allowed mains frequency
change
fLN Hz (50…60) + - 2
d fLN /t Hz/s 2% * fLN
Fig. 5-3: Extended range of power voltage
Note: When using HCS02 and HCS03 devices in the mains voltage
range up to 3 * AC 500 V, make sure the additional
components you use may be operated in this mains voltage
range. NFD mains filters, for example, can only be used up to
3 * AC 480 V.