04.01.2013 Views

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11<br />

1. Joist Type: LH-series steel joists.<br />

2. End Arrangement: Square.<br />

3. Top-Chord Arrangement: Parallel, and Pitched 1/4 inch per 12 inches<br />

two ways.<br />

B. Provide holes in chord members for connecting and securing other construction to joists.<br />

C. Camber long-span steel joists according to SJI's "Specifications.".<br />

D. Equip bearing ends of joists with manufacturer's standard beveled ends or sloped shoes if joist slope<br />

exceeds 1/4 inch per 12 inches (1:48) .<br />

2.4 PRIMERS<br />

A. Low-Emitting Materials: Paints and coatings shall comply with the testing and product requirements of the<br />

California Department of Health Services' "Standard Practice for the Testing of Volatile Organic Emissions<br />

from Various Sources Using Small-Scale Environmental Chambers."<br />

B. Primer: SSPC-Paint 15, or manufacturer's standard shop primer complying with performance<br />

requirements in SSPC-Paint 15.<br />

C. Primer: Provide shop primer that complies with Section 099113 "Exterior Painting" and Section 099123<br />

"Interior Painting."<br />

2.5 JOIST ACCESSORIES<br />

A. Bridging: Provide bridging anchors and number of rows of horizontal or diagonal bridging of material, size,<br />

and type required by SJI's "Specifications" for type of joist, chord size, spacing, and span. Furnish<br />

additional erection bridging if required for stability.<br />

B. Bridging: Schematically indicated. Detail and fabricate according to SJI's "Specifications". Furnish<br />

additional erection bridging if required for stability.<br />

C. Bridging: Fabricate as indicated and according to SJI's "Specifications." Furnish additional erection<br />

bridging if required for stability.<br />

D. Fabricate steel bearing plates from ASTM A 36/A 36M steel with integral anchorages of sizes and<br />

thicknesses indicated. Shop prime paint.<br />

E. Steel bearing plates with integral anchorages are specified in Section 055000 "Metal Fabrications."<br />

F. Furnish ceiling extensions, either extended bottom-chord elements or a separate extension unit of enough<br />

strength to support ceiling construction. Extend ends to within 1/2 inch (13 mm) of finished wall surface<br />

unless otherwise indicated.<br />

G. Carbon-Steel Bolts and Threaded Fasteners: ASTM A 307, Grade A (ASTM F 568M, Property Class 4.6) ,<br />

carbon-steel, hex-head bolts and threaded fasteners; carbon-steel nuts; and flat, unhardened steel<br />

washers.<br />

1. Finish: Plain, uncoated.<br />

STEEL JOIST FRAMING 052100 - 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!