04.01.2013 Views

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11<br />

2. Fujitec America, Inc.<br />

3. KONE Inc.<br />

4. Minnesota Elevator, Inc.<br />

5. Mowrey Elevator Co.<br />

6. Otis Elevator Co.<br />

7. Schindler Elevator Corp.<br />

8. Schumacher Elevator Co.<br />

B. Source Limitations: Obtain elevators from single manufacturer.<br />

1. Major elevator components, including pump-and-tank units, plunger-cylinder assemblies,<br />

controllers, signal fixtures, door operators, car frames, cars, and entrances, shall be manufactured<br />

by single manufacturer.<br />

2.2 PERFORMANCE REQUIREMENTS<br />

A. Regulatory Requirements: Comply with ASME A17.1/CSA B44.<br />

B. Accessibility Requirements: Comply with Section 407 in the U.S. Architectural & Transportation Barriers<br />

Compliance Board's ADA-ABA Accessibility Guidelines and with ICC A117.1.<br />

C. Seismic Performance: Elevator system shall withstand the effects of earthquake motions determined<br />

according to ASCE/SEI 7 and shall comply with elevator safety requirements for seismic risk Zone 2 or<br />

greater in ASME A17.1/CSA B44.<br />

1. For Passenger Elevators the term "withstand" means "the system will remain in place without<br />

separation of any parts when subjected to the seismic forces specified and the system will be fully<br />

operational after the seismic event."<br />

2. For Freight Elevators the term "withstand" means "the system will remain in place without<br />

separation of any parts when subjected to the seismic forces specified.”<br />

3. Affected peak velocity acceleration (Av) for Project's location is greater than or equal to 0.20<br />

(seismic risk Zones 3 and 4).<br />

4. Provide earthquake equipment required by ASME A17.1/CSA B44.<br />

5. Provide seismic switch required by ASCE/SEI 7.<br />

6. Design earthquake spectral response acceleration short period (Sds) for Project is I1.0.<br />

7. Project's Seismic Design Category: D.<br />

8. Passenger Elevator Component Importance Factor: 1.5.<br />

9. Freight Elevator Component Importance Factor: 1.0.<br />

2.3 ELEVATORS<br />

A. Elevator System, General: Manufacturer's standard elevator systems. Unless otherwise indicated,<br />

manufacturers' standard components shall be used, as included in standard elevator systems and as<br />

required for complete system.<br />

B. Elevator Description:<br />

1. Group Number: Sort Building - Group 1.<br />

2. Elevator Number(s): PA-ELV.<br />

HYDRAULIC ELEVATORS 14240 - 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!