04.01.2013 Views

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11<br />

1.16 WORKMANSHIP<br />

A. Work shall be installed only by mechanics skilled in the particular trade and licensed as may be<br />

required.<br />

1.17 EXISTING UTILITIES AND SERVICES<br />

A. Connect to existing utilities and services as indicated on the Drawings. Utilities and services have<br />

been located as accurately as possible; however, the exact location is not guaranteed. Prior to<br />

bidding, Contractor must inspect job site conditions and determine locations as required.<br />

Variations from locations indicated on the Drawings will not be basis for additional compensation.<br />

1.18 CARE AND PROTECTION OF ROOF SYSTEM<br />

A. The Sort Building roofing system is susceptible to damage caused by excessive heat, petroleum<br />

based oil contact and sharp objects. This system must be positively protected from sparks,<br />

flames, oils and mechanical abuse. Protect the roof system from damage during the course of this<br />

work that occurs on the roof surface.<br />

1.19 STANDARDIZATION<br />

A. All similar items of equipment shall be of the same manufacturer.<br />

1.20 PRODUCT DELIVERY HANDLING AND STORAGE<br />

A. Shipping, handling, and storage of products shall be in strict accordance with the manufacturer's<br />

recommendations regarding covering, unloading and storage in clean, dry areas.<br />

B. Items damaged in shipment or during handling, storage or erection will be rejected and must be<br />

replaced at no additional compensation to the Contractor.<br />

PART 2 - PRODUCTS<br />

2.1 AS-BUILT DRAWINGS<br />

A. Maintain two sets of Contract Documents; i.e., Drawings (including the Owner insuring agency<br />

approved Drawings), Specifications, addenda, modifications, and submittals at the site in good<br />

order, and annotated daily to show all changes made during the construction process. These<br />

Drawings shall be made available for review by the Engineer upon his request. At the conclusion<br />

of the project, verify the accuracy of these Drawings and stamp each Drawing "AS-BUILT" with a<br />

stamp indicating the Contractor's name, date, and signature of a principal of the company. Deliver<br />

one set to the Owner and one set to the Engineer.<br />

B. All uncovered, charted or not charted utilities shall be exactly located on the Record Drawings by<br />

dimensions from a column or suitable building wall. Verify all inverts. Deviations greater than 1/4<br />

inch shall be recorded.<br />

GENERAL PROVISIONS – MECHANICAL 15010-6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!