TranSystems Corporation - LGM Construction

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11
1.4 SUBMITTALS
A. Product Data: Include capacities, sizes, performances, operations, safety features, finishes, and similar
information. Include product data for car enclosures, hoistway entrances, and operation, control, and
signal systems.
B. Shop Drawings:
1. Include plans, elevations, sections, and large-scale details indicating service at each landing,
machine room layout, coordination with building structure, relationships with other construction,
and locations of equipment.
2. Include large-scale layout of car-control station and standby power operation control panel.
3. Indicate maximum dynamic and static loads imposed on building structure at points of support, and
maximum and average power demands.
C. Samples: For exposed car, hoistway door and frame, and signal equipment finishes; 3-inch- (75-mm-)
square Samples of sheet materials; and 4-inch (100-mm) lengths of running trim members.
D. Qualification Data: For Installer.
E. Seismic Qualification Certificates: For elevator equipment, accessories, and components, from
manufacturer.
1. Basis for Certification: Indicate whether withstand certification is based on actual test of
assembled components or on calculation.
2. Dimensioned Outline Drawings of Equipment Unit: Identify center of gravity and locate and
describe mounting and anchorage provisions.
3. Detailed description of equipment anchorage devices on which the certification is based and their
installation requirements.
F. Manufacturer Certificates: Signed by elevator manufacturer certifying that hoistway, pit, and machine
room layout and dimensions, as shown on Drawings, and electrical service including standby power
generator, as shown and specified, are adequate for elevator system being provided.
G. Sample Warranty: For special warranty.
H. Operation and Maintenance Data: For elevators to include in emergency, operation, and maintenance
manuals.
1. In addition to items specified in Section 01782 "Operation and Maintenance Data," include
diagnostic and repair information available to manufacturer's and Installer's maintenance
personnel.
I. Inspection and Acceptance Certificates and Operating Permits: As required by authorities having
jurisdiction for normal, unrestricted elevator use.
J. Continuing Maintenance Proposal: Submit a continuing maintenance proposal from Installer to Owner, in
the form of a standard five-year maintenance agreement, starting on date initial maintenance service is
concluded. State services, obligations, conditions, and terms for agreement period and for future renewal
options.
HYDRAULIC ELEVATORS 14240 - 2