TranSystems Corporation - LGM Construction

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11
1.5 QUALITY ASSURANCE
1.6 CODES
A. The Contractor shall guarantee, in writing, all materials and workmanship for a minimum period of
one year (unless a longer warranty period is indicated in specific specification sections for specific
types of equipment) from the date of written acceptance by the Owner.
B. All electrical materials and equipment shall be UL listed for their intended purpose, unless
otherwise noted.
C. Work shall be installed by mechanics skilled in the particular trade and licensed as may be
required.
D. Shipping, storage and handling of all materials and equipment shall be in strict accordance with
the manufacturer's instructions regarding both loading, unloading, and storing in clean, dry areas.
The Contractor shall protect the electrical equipment from damage. Damaged material, whether
damaged in shipment, storage, handling, installation or testing, shall be repaired or replaced by
the Contractor without additional cost to the Owner.
E. Any discoloration or damage to any part of the facility or any of its systems or furnishings, due to
the Contractor shall be repaired by the Contractor without additional cost to the Owner.
A. Install work to comply with all applicable electrical Codes, and other applicable local and state
Codes, ordinances, restrictions, and all Authorities Having Jurisdiction.
1.7 REFERENCE STANDARDS
A. Portions or all of certain recognized industry or association standards referred to herein shall be a
requirement of these specifications and shall be considered as binding as though herein
reproduced in full. Unless otherwise stated, the reference standard shall be the current standard
as of the date of issuance of these specifications. Reference may be made to standards either by
full name or by abbreviation. The reference standards shall include, but are not necessarily limited
to the following:
ADA Americans with Disabilities Act
ANSI American National Standards Institute
ASTM American Society for Testing and Materials
CRSI Concrete Reinforcing Steel Institute
FM (FMRC) Factory Mutual
IEEE Institute of Electrical and Electronics Engineers
NEMA National Electrical Manufacturers Association
NFPA National Fire Protection Association
UL Underwriters' Laboratories, Inc.
B. Where reference Codes, Standards or guidelines are in conflict, the most stringent shall govern.
GENERAL PROVISIONS - ELECTRICAL 16010-3