04.01.2013 Views

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11<br />

1.8 SEISMIC CONSIDERATIONS<br />

A. This facility is located in a seismic zone. All equipment shall be rated for application in a seismic<br />

zone in accordance with applicable codes and ASCE/SEI 7 “Minimum Design Loads for Buildings<br />

and Other Structures” . Installation of all electrical equipment shall comply with the manufacturer’s<br />

recommended methods for seismic zone installation. All electrical equipment shall be seismically<br />

restrained in accordance with all applicable Codes.<br />

1.9 SUBMITTALS<br />

A. Submittals shall be in accordance with Division 1.<br />

1.10 SUBSTITUTIONS<br />

A. Substitutions shall be in accordance with Division 1.<br />

1.11 RECORD DRAWINGS<br />

A. Maintain two sets of Contract Documents; i.e., drawings (including the Owner insuring agency<br />

approved drawings), specifications, addenda, modifications, and submittals at the site in good<br />

order, and annotated daily to show changes made during the construction process. At the<br />

conclusion of the project, verify the accuracy of these record drawings and deliver one set to the<br />

Owner and one set to the Engineer.<br />

B. Record deviations from the Contract Documents and clearly show deviations on the record<br />

drawings. These deviations shall include, but not necessarily be limited to the following:<br />

• Changing homerun designations<br />

• Modification of any component rating<br />

• Changing the location of any electrical component shown on the drawings<br />

1.12 OPERATING AND MAINTENANCE MANUALS<br />

A. Upon completion of the project and prior to acceptance by the Owner, provide four complete sets<br />

of operating and maintenance manuals for all equipment and systems furnished by the Contractor.<br />

Operating and maintenance manuals shall be in printed form, clearly marked with appropriate<br />

system or equipment identification, and shall include the following information:<br />

• List of all equipment installed including manufacturer and model number<br />

• Manufacturer’s operation and maintenance manuals for all equipment and systems<br />

• Test reports<br />

• Approved drawings and calculations<br />

• Certifications<br />

• Contact information for all applicable local servicing agencies<br />

GENERAL PROVISIONS - ELECTRICAL 16010-4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!