TranSystems Corporation - LGM Construction

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11
PART 2 - PRODUCTS
2.1 GENERAL REQUIREMENTS FOR PANELBOARDS
A. Fabricate and test panelboards according to IEEE 344 “Recommended Practice for Seismic Qualification
of Class 1E Equipment for Nuclear Power Generating Stations”
to withstand seismic forces.
B. Enclosures: Surface-mounted cabinets.
1. Rated for environmental conditions at installed location.
a. Indoor Dry and Clean Locations: NEMA 250 “Enclosures for Electrical Equipment (1000
Volts Maximum) ”, Type 1.
b. Outdoor Locations: NEMA 250 “ Enclosures for Electrical Equipment (1000 Volts
Maximum) ”, Type 3R.
c. Wet or Damp Indoor Locations: NEMA 250 “ Enclosures for Electrical Equipment (1000
Volts Maximum) ”, Type 4.
2. Front: Secured to box with concealed trim clamps. For surface-mounted fronts, match box
dimensions; for flush-mounted fronts, overlap box.
3. Hinged Front Cover: Entire front trim hinged to box and with standard door within hinged trim
cover.
4. Directory Card: Inside panelboard door, mounted in transparent card holder.
C. Phase, Neutral, and Ground Buses: Copper
D. Service Equipment Label: UL labeled for use as service equipment for panelboards with one or more
main service disconnecting and overcurrent protective devices.
E. Future Devices: Mounting brackets, bus connections, filler plates, and necessary appurtenances required
for future installation of devices.
F. Panelboard Short-Circuit Current Rating: Fully rated to interrupt symmetrical short-circuit current available
at terminals.
G. Basis-of-Design Product: Subject to compliance with requirements, provide product by one of the
following:
1. General Use Panelboards
a. Eaton Electrical Inc.; Cutler-Hammer Business Unit.
b. General Electric Company; GE Consumer & Industrial - Electrical Distribution.
c. Square D; a brand of Schneider Electric.
2. Lighting Control Panelboards
a. Eaton Electrical Inc.; Cutler-Hammer Business Unit. – PowR Command 2000
b. Square D; a brand of Schneider Electric – Powerlink 2000
c. Note: Branch breakers shall be able to be overridden manually at the breaker without use of
programming.
H. Doors: Secured with vault-type latch with tumbler lock; keyed alike.
PANELBOARDS 16420 - 2