TranSystems Corporation - LGM Construction

Recommendations

Info

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11 B. Accessibility Requirements: Bevel raised thresholds with a slope of not more than 1:2. Provide thresholds not more than 1/2 inch (13 mm) high. C. Thresholds for Means of Egress Doors: Comply with NFPA 101. Maximum 1/2 inch (13 mm) high. D. Manufacturers: 1. Hager Companies (HAG). 2. M-D Building Products, Inc. (MD). 3. National Guard Products (NGP). 4. Pemko Manufacturing Co. (PEM). 5. Reese Enterprises (RE). 6. Rixson Specialty Door Controls; an ASSA ABLOY Group company (RIX). 7. Sealeze; a unit of Jason Incorporated (SEL). 8. Zero International (ZRO). 2.17 FABRICATION A. Base Metals: Produce door hardware units of base metal, fabricated by forming method indicated, using manufacturer's standard metal alloy, composition, temper, and hardness. Furnish metals of a quality equal to or greater than that of specified door hardware units and BHMA A156.18. Do not furnish manufacturer's standard materials or forming methods if different from specified standard. B. Fasteners: Provide screws according to commercially recognized industry standards for application intended, except aluminum fasteners are not permitted. Provide Phillips flat-head screws with finished heads to match surface of door hardware, unless otherwise indicated. 1. Comply with NFPA 80 for fasteners of door hardware in fire-rated applications. C. Finishes: BHMA A156.18, as indicated in door hardware sets. PART 3 - EXECUTION 3.1 INSTALLATION A. Steel Doors and Frames: Comply with DHI A115 Series. Drill and tap doors and frames for surfaceapplied door hardware according to ANSI A250.6. B. Wood Doors: Comply with DHI A115-W Series. C. Mounting Heights: Mount door hardware units at heights indicated as follows unless otherwise indicated or required to comply with governing regulations. 1. Standard Steel Doors and Frames: DHI's "Recommended Locations for Architectural Hardware for Standard Steel Doors and Frames." 2. Custom Steel Doors and Frames: DHI's "Recommended Locations for Builders' Hardware for Custom Steel Doors and Frames." 3. Wood Doors: DHI WDHS.3, "Recommended Locations for Architectural Hardware for Wood Flush Doors." DOOR HARDWARE 08710 - 10
501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11 D. Install each door hardware item to comply with manufacturer's written instructions. Where cutting and fitting are required to install door hardware onto or into surfaces that are later to be painted or finished in another way, coordinate removal, storage, and reinstallation of surface protective trim units with finishing work specified in Division 9 Sections. Do not install surface-mounted items until finishes have been completed on substrates involved. E. Thresholds: Set thresholds for exterior and acoustical doors in full bed of sealant complying with requirements specified in Division 7 Section "Joint Sealants." F. Adjustment: Adjust and check each operating item of door hardware and each door to ensure proper operation or function of every unit. Replace units that cannot be adjusted to operate as intended. Adjust door control devices to compensate for final operation of heating and ventilating equipment and to comply with referenced accessibility requirements. 1. Spring Hinges: Adjust to achieve positive latching when door is allowed to close freely from an open position of 30 degrees. 2. Door Closers: Unless otherwise required by authorities having jurisdiction, adjust sweep period so that, from an open position of 70 degrees, the door will take at least 3 seconds to move to a point 3 inches (75 mm) from the latch, measured to the leading edge of the door. 3.2 DOOR HARDWARE SETS Door Hardware Set No. 01 Non-CBP Exterior Storefront Entrance Door (Pair) Manufacturer No./ ANSI / Item Description BHMA No. Grade Finish Hinges: 6 pair Full Mortise, Nonremovable Pins, BHMA A5111 1 Manufacture’s 41/2”x4 1/2" standard Lockset Concealed Vertical Rod Touch Bar Panic per Storefront manufacturer BHMA A156.3 1 Match Storefront Operating Trim Storefront Manufacture’s standard 1 Match Storefront Closer Storefront Manufacture’s standard 1 Match Storefront Weather Stripping Head and Jamb Type, Two Piece BHMA R0Y104 Manufacture’s Interlocking, standard Sill Sweep Storefront Manufacture’s standard 1 Manufacture’s standard Door Stop Floor Dome Type BHMA L02141 1 Black Anodized Threshold Saddle type with thermal barrier BHMA J32190 1 Match Storefront Door Hardware Set No. 02 Non-CBP and CBP Exterior Exit / Egress Door Manufacturer No./ ANSI / Item Description BHMA No. Grade Finish Hinges: 3 pair Full Mortise, Nonremovable Pins, 41/2”x4 1/2" BHMA A5111 1 Dull Stainless Steel Lockset Fully Mortised Lock, Exit Device Von Duprin, 9975 1 Dark Bronze Operating Trim Lever – Night Latch 9975L-NL 1 Dark Bronze Closing Devices Parallel Arm Mounting Type BHMA C02021 1 Oil Rubbed Bronze Rain Drip Applied to Frame Header Face BHMA R0Y936 Oil Rubbed Bronze DOOR HARDWARE 08710 - 11
Page 1 and 2:
Federal Express Oakland Sort Expans
Page 3 and 4:
501070099 Federal Express Oakland S
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
FedEx Express Oakland Sort Expansio
Page 25 and 26:
FedEx Express Oakland Sort Expansio
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
--> --> --> --> INSTRUCTIONS • Us
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452: 501070099 Federal Express Oakland S
Page 501: 501070099 Federal Express Oakland S
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
Page 601 and 602:
Page 603 and 604:
Page 605 and 606:
Page 607 and 608:
Page 609 and 610:
Page 611 and 612:
Page 613 and 614:
Page 615 and 616:
Page 617 and 618:
Page 619 and 620:
Page 621 and 622:
Page 623 and 624:
Page 625 and 626:
Page 627 and 628:
Page 629 and 630:
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
Page 637 and 638:
Page 639 and 640:
Page 641 and 642:
Page 643 and 644:
Page 645 and 646:
Page 647 and 648:
Page 649 and 650:
Page 651 and 652:
Page 653 and 654:
Page 655 and 656:
Page 657 and 658:
Page 659 and 660:
Page 661 and 662:
Page 663 and 664:
Page 665 and 666:
Page 667 and 668:
Page 669 and 670:
Page 671 and 672:
Page 673 and 674:
Page 675 and 676:
Page 677 and 678:
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
Page 689 and 690:
Page 691 and 692:
Page 693 and 694:
Page 695 and 696:
Page 697 and 698:
Page 699 and 700:
Page 701 and 702:
Page 703 and 704:
Page 705 and 706:
Page 707 and 708:
Page 709 and 710:
Page 711 and 712:
Page 713 and 714:
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
Page 721 and 722:
Page 723 and 724:
Page 725 and 726:
Page 727 and 728:
Date: TranSystems 220 St.Charles Wa
Page 729 and 730:
Page 731 and 732:
Page 733 and 734:
Page 735 and 736:
Page 737 and 738:
Page 739 and 740:
Page 741 and 742:
Page 743 and 744:
Page 745 and 746:
Page 747 and 748:
Page 749 and 750:
Page 751 and 752:
Page 753 and 754:
Page 755 and 756:
Page 757 and 758:
Page 759 and 760:
Page 761 and 762:
Page 763 and 764:
Page 765 and 766:
Page 767 and 768:
Page 769 and 770:
Page 771 and 772:
Page 773 and 774:
Page 775 and 776:
Page 777 and 778:
Page 779 and 780:
Page 781 and 782:
Page 783 and 784:
Page 785 and 786:
Page 787 and 788:
Page 789 and 790:
Page 791 and 792:
Page 793 and 794:
Page 795 and 796:
Page 797 and 798:
Page 799 and 800:
Page 801 and 802:
Page 803 and 804:
Page 805 and 806:
Page 807 and 808:
Page 809 and 810:
Page 811 and 812:
Page 813 and 814:
Page 815 and 816:
Page 817 and 818:
Page 819 and 820:
Page 821 and 822:
Page 823 and 824:
Page 825 and 826:
Page 827 and 828:
Page 829 and 830:
Page 831 and 832:
Page 833 and 834:
Page 835 and 836:
Page 837 and 838:
Page 839 and 840:
Page 841 and 842:
Page 843 and 844:
Page 845 and 846:
Page 847 and 848:
Page 849 and 850:
Page 851 and 852:
Page 853 and 854:
Page 855 and 856:
Page 857 and 858:
Page 859 and 860:
Page 861 and 862:
Page 863 and 864:
Page 865 and 866:
Page 867 and 868:
Page 869 and 870:
Page 871 and 872:
Page 873 and 874:
Page 875 and 876:
Page 877 and 878:
Page 879 and 880:
Page 881 and 882:
Page 883 and 884:
Page 885 and 886:
Page 887 and 888:
Page 889 and 890:
Page 891 and 892:
Page 893 and 894:
Page 895 and 896:
Page 897 and 898:
Page 899 and 900:
Page 901 and 902:
Page 903 and 904:
Page 905 and 906:
Page 907 and 908:
Page 909 and 910:
Page 911 and 912:
Page 913 and 914:
Page 915 and 916:
Page 917 and 918:
Page 919 and 920:
Page 921 and 922:
Page 923 and 924:
Page 925 and 926:
FEDERAL EXPRESS CORPORATION STANDAR
Page 927 and 928:
Exhibits Page Description of Projec
Page 929 and 930:
Contractor shall provide and furnis
Page 931 and 932:
(a) written modifications, addenda,
Page 933 and 934:
(viii) interference by a Separate C
Page 935 and 936:
Date in accordance with the terms o
Page 937 and 938:
(b) The Contractor’s Fee, as adju
Page 939 and 940:
segregated so as to give adequate n
Page 941 and 942:
agency that issued that permit or l
Page 943 and 944:
procedures that differ from, or tha
Page 945 and 946:
Section 6.03. Information From Supp
Page 947 and 948:
(ii) require that the Subcontractor
Page 949 and 950:
execute at Contractor’s request a
Page 951 and 952:
determine the adjustments in the Co
Page 953 and 954:
(ii) the Contractor’s “Cost of
Page 955 and 956:
In the calculation of a “Cost of
Page 957 and 958:
perform the Work in the State and l
Page 959 and 960:
person to be replaced, immediately
Page 961 and 962:
ARTICLE 13 PERMITS, LICENSES, LAWS
Page 963 and 964:
FedEx reports that the testing cons
Page 965 and 966:
1,000 gallons (or, if the job site
Page 967 and 968:
performance of the Work and that an
Page 969 and 970:
Contract Documents, Contractor shal
Page 971 and 972:
(vi) to waive and release, to the e
Page 973 and 974:
Section 18.03. Assignment of Warran
Page 975 and 976:
of the date on which the insurer in
Page 977 and 978:
acts or omissions any of the forego
Page 979 and 980:
(d) Contractor shall indemnify, def
Page 981 and 982:
acknowledgement or an arbitrator’
Page 983 and 984:
exercises the termination right, Co
Page 985 and 986:
proposed discovery schedules to the
Page 987 and 988:
corporation in any merger or other
Page 989 and 990:
Section 28.16. Notices. All notices
Page 991 and 992:
A-1 Exhibit A-1 to that certain Con
Page 993 and 994:
Gentlemen: B-1-2 NOTICE TO PROCEED
Page 995 and 996:
C-1-2 (E) a Partial Waiver of Mecha
Page 997 and 998:
C-2-1 Exhibit C-2 to that certain C
Page 999 and 1000:
C-2-3 APPLICATION FOR PAYMENT FedEx
Page 1001 and 1002:
C-3-2 PARTIAL WAIVER OF LIEN: MATER
Page 1003 and 1004:
Exhibit C-4 to that certain Constru
Page 1005 and 1006:
Exhibit C-5 to that certain Constru
Page 1007 and 1008:
C-6-2 CONTRACTOR’S TRANSACTION TA
Page 1009 and 1010:
D-1-2 CHANGE ORDER Agreement No. Ch
Page 1011 and 1012:
Agreement No. Change Order Date: Ch
Page 1013 and 1014:
D-2-2 CONSTRUCTION CHANGE DIRECTIVE
Page 1015 and 1016:
If the bold-faced portion of this C
Page 1017 and 1018:
5. If an exposure exists, Contracto
Page 1019 and 1020:
F-2 the costs associated with submi
Page 1021 and 1022:
To the extent FedEx, the TSA or the
Page 1023 and 1024:
G-1 I. DBE PARTICIPATION Exhibit G
Page 1025 and 1026:
G-3 2. A Women-owned Business Enter
Page 1027 and 1028:
G-5 MONTHLY DBE COMPLIANCE REPORT P
Page 1029 and 1030:
H-2 2. Contractor agrees that no pe
Page 1031 and 1032:
H-4 related medical condition, a kn
Page 1033 and 1034:
H-6 Asbestos Fluorocarbons Freon Ch
Page 1035 and 1036:
H-8 compliance, and at such times a
Page 1037 and 1038:
H-10 ATTACHMENT A Non-Discriminatio
Page 1039 and 1040:
to the worker, including costs and
Page 1041 and 1042:
Except where the context otherwise
Page 1043:
APPENDIX B
Page 1051:
June 13, 2008 File No.: 94240 GEOTE
Page 1054 and 1055:
8.1.4 Site Drainage................
Page 1056 and 1057:
4. Analyzing the field and laborato
Page 1058 and 1059:
Our field engineer removed the samp
Page 1060 and 1061:
4.0 GEOLOGIC AND SEISMIC SETTING Th
Page 1062 and 1063:
A generalized summary of site-speci
Page 1064 and 1065:
5.2.1 Clayey Gravel Fill Based on t
Page 1066 and 1067:
6.0 GEOLOGIC HAZARDS Geologic hazar
Page 1068 and 1069:
to damage in earthquake from latera
Page 1070 and 1071:
7.2 CORROSIVITY Based on the corros
Page 1072 and 1073:
during construction. Abandoned util
Page 1074 and 1075:
8.1.4 Site Drainage Proper site dra
Page 1076 and 1077:
8.2.4 Construction Considerations W
Page 1078 and 1079:
Fa and Fv are estimated from Tables
Page 1080 and 1081:
Kleinfelder of such intended use. B
Page 1082 and 1083:
Tokimatsu, K. and H.B. Seed (1987),
Page 1084 and 1085:
PLATES
Page 1086 and 1087:
ATTACHED IMAGES: Images: SITE-VIC.j
Page 1088 and 1089:
MAJOR DIVISIONS LTR ID DESCRIPTION
Page 1090 and 1091:
L:\2008\08PROJECTS\94240\94240.GPJ
Page 1092 and 1093:
L:\2008\08PROJECTS\94240\94240.GPJ
Page 1094 and 1095:
L:\2008\08PROJECTS\94240\94240.GPJ
Page 1096 and 1097:
L:\2008\08PROJECTS\94240\94240.GPJ
Page 1098 and 1099:
APPENDIX C
Page 1100 and 1101:
June 2, 2008 Cooper Testing Laborat
Page 1102 and 1103:
Corrosivity Test Summary CTL # 336-
Page 1104 and 1105:
BIDDING UNDER THE PROJECT LABOR AGR
Page 1106 and 1107:
APPENDIX C3
Page 1108 and 1109:
INDEX PREAMBLE 3 ARTICLE I PURPOSE
Page 1110 and 1111:
PORT OF OAKLAND MARITIME AND AVIATI
Page 1112 and 1113:
ARTICLE I PURPOSE The Port of Oakla
Page 1114 and 1115:
Vision 2000 additional facilities:
Page 1116 and 1117:
(g) Construction work ancillary to
Page 1118 and 1119:
epresentatives of all interested or
Page 1120 and 1121:
The Committee shall meet at the cal
Page 1122 and 1123:
applicants will be reviewed and tes
Page 1124 and 1125:
A Agreement for the period during w
Page 1126 and 1127:
Section 4. On work where the person
Page 1128 and 1129:
of or in addition to any other cont
Page 1130 and 1131:
ARTICLE IX DISPUTES AND GRIEVANCES
Page 1132 and 1133:
Section 4. Any grievance involving
Page 1134 and 1135:
negotiated under the applicable Sch
Page 1136 and 1137:
forth in this Agreement and which i
Page 1138 and 1139:
they shall be properly supervised a
Page 1140 and 1141:
contractor requests employees to re
Page 1142 and 1143:
ARTICLE XVII WORKING CONDITIONS Sec
Page 1144 and 1145:
(2) Any claim for non-payment of wa
Page 1146 and 1147:
Its Affiliated International Unions
Page 1148 and 1149:
International Union of Elevator Con
Page 1150 and 1151:
International Union of Operating En
Page 1152 and 1153:
[Date] [Addressee] [Address] [Addre
Page 1154 and 1155:
February 28, 2000 Letter of Underst
Page 1156 and 1157:
Page 1158 and 1159:
February 28, 2000 Mr. Larry Blevins
Page 1160 and 1161:
Letter of Understanding re: Small L
Page 1162 and 1163:
Page 1164 and 1165:
“Notice to Tenant” “It has co
Page 1166 and 1167:
Letter of Understanding: Union Hiri
Page 1168 and 1169:
Letter of Understanding: Contractor
Page 1170 and 1171:
SECTION 00550 EXHIBIT A PORT OF OAK
Page 1172 and 1173:
10. Q. Can our company link into Dr
Page 1174 and 1175:
ENROLLMENT INSTRUCTIONS As Easy as.
Page 1176 and 1177:
WHO SHOULD YOUR COMMUNICATOR BE? Th
Page 1178 and 1179:
Drugtest.com 10750 Hammerly Blvd.,
Page 1180 and 1181:
APPENDIX D
Page 1182 and 1183:
Section 7. Lockout and Tagging ....
Page 1184 and 1185:
Section 2. Definitions and Acronyms
Page 1186 and 1187:
2.3. Acronyms ANSI American Nationa
Page 1188 and 1189:
4.3. Emergency Reporting Procedures
Page 1190 and 1191:
4.7. Fuel Spill 4.7.1. Discharged f
Page 1192 and 1193:
4.12. Transportation 4.12.1. It is
Page 1194 and 1195:
MSDS dated three years earlier than
Page 1196 and 1197:
j. Waste resulting from the work mu
Page 1198 and 1199:
7.1.5. This procedure, when used in
Page 1200 and 1201:
c. Personnel from other crafts perf
Page 1202 and 1203:
Section 8. Welding, Cutting, and Bu
show all

TranSystems Corporation - LGM Construction

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?