04.01.2013 Views

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11<br />

1. Indoor Locations: NEMA 250, Type 12 unless otherwise noted.<br />

2. Outdoor Locations: NEMA 250, Type 3R unless otherwise noted.<br />

PART 3 - EXECUTION<br />

3.1 INSTALLATION<br />

A. Install individual wall-mounted switches with tops at uniform height unless otherwise indicated.<br />

B. Temporary Lifting Provisions: Remove temporary lifting eyes, channels, and brackets and temporary<br />

blocking of moving parts from enclosures and components.<br />

C. Install fuses in fusible devices.<br />

3.2 IDENTIFICATION<br />

A. Comply with requirements in Division 16 Section "Electrical Identification."<br />

1. Identify field-installed conductors, interconnecting wiring, and components; provide warning signs.<br />

2. Label each enclosure with laminated-plastic nameplate.<br />

3.3 FIELD QUALITY CONTROL<br />

A. Perform tests and inspections.<br />

B. Acceptance Testing Preparation:<br />

1. Test continuity of each circuit.<br />

C. Tests and Inspections:<br />

1. Perform visual and mechanical inspections and electrical tests.<br />

2. Correct malfunctioning units on-site, where possible, and retest to demonstrate compliance;<br />

otherwise, replace with new units and retest.<br />

D. Enclosed switches will be considered defective if they do not pass tests and inspections.<br />

END OF SECTION 16410<br />

ENCLOSED SWITCHES AND CIRCUIT BREAKERS 16410 - 3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!