04.01.2013 Views

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11<br />

E. Adhesive: As recommended by impact-resistant plastic wall protection manufacturer and that complies<br />

with the testing and product requirements of the California Department of Health Services' "Standard<br />

Practice for the Testing of Volatile Organic Emissions from Various Sources Using Small-Scale<br />

Environmental Chambers."<br />

2.2 WALL GUARDS<br />

A. Rub Rail as indicated on Drawings: Assembly consisting of continuous snap-on cover installed over<br />

concealed, continuous retainer.<br />

1. Product: Provide Acrovyn FR-270 bumper rail as manufactured by <strong>Construction</strong> Specialties, Inc.<br />

2. Cover: Extruded flexible PVC, minimum 0.078-inch (2.0-mm) wall thickness; as follows:<br />

a. Profile: Half-round profile, nominal 1-1/8 inches high by 1-1/8 inches deep (30 mm high by<br />

30 mm deep) .<br />

b. Color and Texture: Pearl Grey.<br />

3. Retainer: Minimum 0.0625-inch- (1.6-mm-) thick, one-piece, extruded aluminum.<br />

4. End Caps and Corners: Prefabricated, injection-molded plastic; color matching cover; field<br />

adjustable for close alignment with snap-on cover.<br />

5. Accessories: Concealed splices and mounting hardware.<br />

6. Mounting: Surface mounted directly to wall.<br />

2.3 CORNER GUARDS<br />

A. Surface-Mounted, Opaque-Plastic Corner Guards as indicated on Drawings: Fabricated from PVC plastic,<br />

acrylic-modified vinyl sheet or opaque polycarbonate sheet; with formed edges; fabricated with 90- or 135degree<br />

turn to match wall condition.<br />

1. See Editing Instruction No. 1 in the Evaluations for cautions about naming manufacturers. Retain<br />

one of first two subparagraphs and list of manufacturers below. See Section 016000 "Product<br />

Requirements."<br />

2. Product: Provide Acrovyn VA Series Corner Guards as manufactured by <strong>Construction</strong> Specialties,<br />

Inc.<br />

3. Wing Size: Nominal 2-1/2 by 2-1/2 inches (65 by 65 mm).<br />

4. Mounting: Adhesive.<br />

5. Color and Texture: Pearl Grey.<br />

2.4 FABRICATION<br />

A. Fabricate impact-resistant wall protection units to comply with requirements indicated for design,<br />

dimensions, and member sizes, including thicknesses of components.<br />

B. Preform curved semi-rigid, impact-resistant sheet wall covering in factory for radius and sheet thickness as<br />

follows:<br />

1. Sheet Thickness of 0.060 Inch (1.5 mm): 36-inch (914-mm) radius.<br />

IMPACT-RESISTANT WALL PROTECTION 10260 - 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!