04.01.2013 Views

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11<br />

2.3 GLAZING<br />

A. Glass and Glazing Materials: Refer to Division 8 Section "Glazing" for glass units and glazing<br />

requirements applicable to glazed aluminum window units.<br />

B. Glass complying with Division 8 Section "Glazing."<br />

C. Glazing System: Manufacturer's standard factory-glazing system as indicated in Division 8 Section<br />

"Glazing."<br />

2.4 FABRICATION<br />

A. Fabricate aluminum windows that are reglazable without dismantling sash or ventilator framing.<br />

B. Weather Stripping: Provide full-perimeter weather stripping for each operable sash and ventilator.<br />

C. Weep Holes: Provide weep holes and internal passages to conduct infiltrating water to exterior.<br />

D. Provide water-shed members above side-hinged ventilators and similar lines of natural water penetration.<br />

E. Mullions: Provide mullions and cover plates as shown, matching window units, complete with anchors for<br />

support to structure and installation of window units. Allow for erection tolerances and provide for<br />

movement of window units due to thermal expansion and building deflections, as indicated. Provide<br />

mullions and cover plates capable of withstanding design loads of window units.<br />

F. Subframes: Provide subframes with anchors for window units as shown, of profile and dimensions<br />

indicated but not less than 0.062-inch- (1.6-mm-) thick extruded aluminum. Miter or cope corners, and<br />

weld and dress smooth with concealed mechanical joint fasteners. Finish to match window units. Provide<br />

subframes capable of withstanding design loads of window units.<br />

G. Glazing Stops: Provide snap-on glazing stops coordinated with Division 8 Section "Glazing" and glazing<br />

system indicated. Provide glazing stops to match sash and ventilator frames.<br />

2.5 ALUMINUM FINISHES<br />

A. Aluminum Anodic Finish: Class II, clear anodic coating complying with AAMA 611.<br />

1. Location: Interior Windows.<br />

B. Baked-Enamel Finish: Thermosetting, modified-acrylic or polyester enamel primer/topcoat system<br />

complying with AAMA 2604 except with a minimum dry film thickness of 1.5 mils (0.04 mm) , medium<br />

gloss.<br />

1. Exterior Window Color: “French Grey” color # GLN47 as manufactured by Glidden Paints.<br />

2. Interior Window Color: Clear Anodized, unless otherwise indicated.<br />

ALUMINUM WINDOWS 08520 - 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!