04.01.2013 Views

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11<br />

D. Back-Mounted Pulls: BHMA A156.9, B02011.<br />

E. Wire Pulls: Back mounted, solid metal, 4 inches (100 mm) long, 5/16 inch (8 mm) in diameter.<br />

F. Catches: Magnetic catches, BHMA A156.9, B03141.<br />

G. Drawer Slides: BHMA A156.9, B05091.<br />

1. Heavy Duty (Grade 1HD-100 and Grade 1HD-200): Side mounted; full-extension type; zinc-plated<br />

steel ball-bearing slides.<br />

2. Box Drawer Slides: Grade 1; for drawers not more than 6 inches (150 mm) high and 24 inches<br />

(600 mm) wide.<br />

3. File Drawer Slides: Grade 1HD-100; for drawers more than 6 inches (150 mm) high or 24 inches<br />

(600 mm) wide.<br />

H. Door Locks: BHMA A156.11, E07121.<br />

I. Drawer Locks: BHMA A156.11, E07041.<br />

J. Exposed Hardware Finishes: For exposed hardware, provide finish that complies with BHMA A156.18 for<br />

BHMA finish number indicated.<br />

1. Satin Bronze: BHMA 613 for bronze base; BHMA 640 for steel base; as selected by Architect from<br />

manufacturer’s full range.<br />

2.4 MISCELLANEOUS MATERIALS<br />

A. Furring, Blocking, Shims, and Hanging Strips: Softwood or hardwood lumber, kiln-dried to less than 15<br />

percent moisture content.<br />

2.5 FABRICATION<br />

A. General: Complete fabrication to maximum extent possible before shipment to Project site. Where<br />

necessary for fitting at site, provide allowance for scribing, trimming, and fitting.<br />

1. Interior Woodwork Grade: Custom.<br />

2. Shop cut openings to maximum extent possible. Sand edges of cutouts to remove splinters and<br />

burrs. Seal edges of openings in countertops with a coat of varnish.<br />

B. Plastic-Laminate Cabinets:<br />

1. AWI Type of Cabinet <strong>Construction</strong>: Reveal overlay on face frame<br />

2. Reveal Dimension: 1/2 inch (13 mm) .<br />

3. Laminate Cladding for Exposed Surfaces: High-pressure decorative laminate as follows:<br />

a. Horizontal Surfaces Other Than Tops: Grade HGL.<br />

b. Post-formed Surfaces: Grade HGP.<br />

c. Vertical Surfaces: Grade VGS.<br />

d. Edges: Grade VGS.<br />

INTERIOR ARCHITECTURAL WOODWORK 06402 - 3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!