TranSystems Corporation - LGM Construction

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11
G. "Work" shall be deemed to consist of all labor and operations, transportation, installation, hoisting,
materials, tools, equipment, services, inspections, investigations, coordination and supervision required
and/or reasonably necessary to produce the construction required by the contract documents.
H. "Furnish" means the design, fabrication, purchase and delivery to the job site or other destination as
directed by the Owner.
I. "Install or Installation" means the act of physically placing, applying, setting, erecting, anchoring, securing,
etc., construction materials, equipment, furnishings, appliances, and similar items specified and furnished
at the job site. Installation of specified items shall be complete in all respects.
J. "Provide" means to furnish and install construction material, equipment, etc. as defined above.
Note: In addition, the following terms have the meaning indicated which are applicable to both the singular and
plural thereof:
K. ADDENDA: Written or graphic instructions issued prior to the opening of Bids which clarify, correct or
change the bidding documents or the Contract Documents.
L. AGREEMENT: The written agreement between Owner and Contractor covering the Work to be
performed; other Contract Documents are attached to the Agreement and made a part thereof as
provided therein.
M. CHANGE ORDER: A written order to the Contractor signed by the Owner authorizing an addition,
deletion or revision in the work, or an adjustment in the Contract Price or the Contract Time issued after
the effective date of the Agreement.
N. DAY: A calendar day of twenty-four hours measured from midnight to next midnight.
O. DRAWINGS: The drawings which show the character and Scope of the Work to be performed and which
are referred to in the Contract Documents.
P. SHOP DRAWINGS: All drawings, illustrations, schedules and other data which are specifically prepared
by the Contractor, a Subcontractor, manufacturer, fabricator, supplier or distributor to illustrate some
portion of the Work and all illustrations, brochures, standard schedules, performance charts, instructions,
diagrams and other information prepared by a manufacturer, fabricator, supplier or distributor and
submitted by the Contractor to illustrate materials or equipment for some portions of the Work.
Q. SUBSTANTIAL COMPLETION: The Work has progressed to the point where, in the opinion of the Owner
as evidenced by a Certificate of Substantial Completion, it is sufficiently complete, in accordance with the
Contract Documents, so that the Work can be utilized for the purposes for which it was intended.
1.4 CORRELATION AND INTENT
A. The Contract Documents are complementary and are intended to include or imply all items required for
the proper execution and completion of the Work. However, in the case of a design/build project, the
Contractor is responsible for providing approved construction documents to the extent of acquiring all
required permits and approvals and complete as-built documents. Any item of work mentioned in the
CONTRACT DOCUMENTS 01015 - 2