TranSystems Corporation - LGM Construction

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11
E. Coordination Drawings: Exterior elevations drawn to scale and coordinating penetrations and wallmounted
items.
F. Product test reports.
G. Maintenance data.
H. Warranties: Samples of special warranties.
1.5 QUALITY ASSURANCE
A. Installer Qualifications: An employer of workers trained and approved by manufacturer.
B. Preinstallation Conference: Conduct conference at Project site.
1.6 WARRANTY
A. Special Warranty: Manufacturer's standard form in which manufacturer agrees to repair or replace
components of metal wall panel assemblies that fail in materials or workmanship within specified warranty
period.
1. Warranty Period: Two years from date of Substantial Completion.
B. Special Warranty on Panel Finishes: Manufacturer's standard form in which manufacturer agrees to repair
finish or replace metal wall panels that show evidence of deterioration of factory-applied finishes within
specified warranty period.
1. Finish Warranty Period: 10 years from date of Substantial Completion.
PART 2 - PRODUCTS
2.1 METAL WALL PANEL DESIGNATION
A. Provide metal wall panels as indicated on the drawings using the following panel type designations:
1. Metal Wall Panel A: See Division 7, Section “Insulated-Core Metal Wall Panels”.
2. Metal Wall Panel B: See Division 7, Section “Insulated-Core Metal Wall Panels”.
3. Metal Wall Panel C: Specified herein.
2.2 PANEL MATERIALS
A. Metallic-Coated Steel Sheet: Restricted flatness steel sheet metallic coated by the hot-dip process and
prepainted by the coil-coating process to comply with ASTM A 755/A 755M.
1. Zinc-Coated (Galvanized) Steel Sheet: ASTM A 653/A 653M, G90 (Z275) coating designation;
structural quality. OR
METAL WALL PANELS 07412 - 2