04.01.2013 Views

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

TranSystems Corporation - LGM Construction

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11<br />

PART 2 - PRODUCTS<br />

2.1 MANUFACTURERS<br />

A. Manufacturers: Subject to compliance with requirements, provide products by one of the following:<br />

1. Amweld Building Products, LLC.<br />

2. Benchmark; a division of Therma-Tru <strong>Corporation</strong>.<br />

3. Ceco Door Products; an Assa Abloy Group company.<br />

4. Curries Company; an Assa Abloy Group company.<br />

5. Deansteel Manufacturing Company, Inc.<br />

6. Firedoor <strong>Corporation</strong>.<br />

7. Fleming Door Products Ltd.; an Assa Abloy Group company.<br />

8. Habersham Metal Products Company.<br />

9. Kewanee <strong>Corporation</strong> (The).<br />

10. Mesker Door Inc.<br />

11. Pioneer Industries, Inc.<br />

12. Security Metal Products Corp.<br />

13. Steelcraft; an Ingersoll-Rand company.<br />

14. Windsor Republic Doors.<br />

2.2 MATERIALS<br />

A. Cold-Rolled Steel Sheet: ASTM A 1008/A 1008M, CS, Type B; suitable for exposed applications.<br />

B. Hot-Rolled Steel Sheet: ASTM A 1011/A 1011M, CS, Type B.<br />

C. Metallic-Coated Steel Sheet: ASTM A 653/A 653M, Commercial Steel (CS), Type B; with minimum A40<br />

metallic coating.<br />

D. Frame Anchors: ASTM A 591/A 591M, Commercial Steel (CS),<br />

phosphatized.<br />

1. For anchors built into exterior walls, steel sheet complying with ASTM A 1008/A 1008M or<br />

ASTM A 1011/A 1011M, hot-dip galvanized according to ASTM A 153/A 153M, Class B.<br />

E. Inserts, Bolts, and Fasteners: Hot-dip galvanized according to ASTM A 153/A 153M.<br />

STEEL DOORS AND FRAMES 08110 - 2<br />

40Z<br />

coating designation; mill<br />

F. Grout: ASTM C 476, except with a maximum slump of 4 inches,<br />

as measured according to<br />

ASTM C 143/C 143M.<br />

G. Mineral-Fiber Insulation: ASTM C 665, Type I.<br />

H. Glazing: Division 8 Section "Glazing."<br />

I. Bituminous Coating: Cold-applied asphalt mastic, SSPC-Paint 12, compounded for 15-mil dry film<br />

thickness per coat.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!