TranSystems Corporation - LGM Construction

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11
B. The data shall include the name and address of the nearest service and maintenance organization that
regularly stocks repair parts. No consideration will be given to partial lists submitted. Materials,
equipment and fixtures will not be acceptable for use at capacity ratings in excess of manufacturer's
published data. Approval of materials and equipment will be tentative, subject to submission of complete
shop drawings indicating compliance with the contract documents.
1.5 CERTIFICATES OF COMPLIANCE
A. Any certificates required for demonstrating proof of compliance of materials with specification
requirements, including mail certificates, statements of application and extended guarantees, shall be
executed in quadruplicate and furnished to the Owner at least ten days prior to delivery.
B. It shall be Contractor's responsibility to review all certificates before submissions are made to the Owner
to ensure compliance with the contract specification requirements and proper execution of the affidavit
prior to submission to the Owner. Each certificate shall be signed by an official authorized to certify in
behalf of the manufacturing company and shall contain the name and address of the Contractor, the
project name and location, and the quantity and date or dates of shipment or delivery to which the
certificates apply.
C. Copies of laboratory test reports submitted with certificates shall contain the name and address of the
testing laboratory and the date or dates of the tests to which the report applies.
D. Certification shall not be construed as relieving the Contractor from furnishing satisfactory material, if,
after tests are performed on selected samples, the material is found not to meet the specific
requirements.
1.6 REVIEW BY ENGINEER
A. Checking of shop drawings and submittals by Architect / Engineer will be on the basis of conformity with
design intent only. Quantities and dimensions are the responsibility of the Contractor.
B. Checking of shop drawings or submittals by Architect / Engineer shall not relieve the Contractor of
responsibility for accuracy for such shop drawings, nor for proper fitting, construction of work, furnishing of
material or work required by the Contract Documents and not indicated on the shop drawings. Shop
drawings or product data checking shall not be construed as approval of departure from requirements of
the Contract Documents.
C. Corrections or changes indicated on Shop Drawings shall not be considered as extra work ordered. If
Shop Drawings show variations from Contract requirements because of standard shop practice, or other
reasons, make specific mention of such variations in submittal letter. Do not execute work required by
Shop Drawings until acceptance is given.
1.7 SAMPLES
A. Where samples are needed, submit four samples to the Construction Manager. Identify samples as to:
manufacturer, item, use, type, project designation, specification section or drawing detail reference, color,
range, texture, finish or other pertinent data.
SUBMITTALS 01040 - 4