TranSystems Corporation - LGM Construction

501070099 Federal Express Oakland Sort Expansion Issued for Bid 10/11
1. Thickness: 6.0 mm.
2. Provide safety glazing labeling.
2.11 LAMINATED-GLASS TYPES
A. Glass Type GL-2: Reflective-coated, laminated vision glass with two plies of heat-strengthened float glass
with inner ply Class 1 (clear).
1. Thickness of Each Glass Ply: 6.0 mm.
2. Interlayer Thickness: 0.030 inch (0.76 mm) .
3. Coating Location: Second or Third surface.
4. Provide safety glazing labeling.
2.12 INSULATING-GLASS TYPES
A. Glass Type GL-3: Low-e-coated, tinted insulating glass.
1. Overall Unit Thickness: 1 inch (25 mm) .
2. Thickness of Each Glass Lite: 6.0 mm.
3. Outdoor Lite: Tinted fully tempered float glass.
4. Interspace Content: Air.
5. Indoor Lite: Clear heat-strengthened float glass.
6. Low-E Coating: Pyrolytic or sputtered on second or third surface.
7. Visible Light Transmittance: 24 percent minimum.
8. Winter Nighttime U-Factor: 0.48 maximum.
9. Summer Daytime U-Factor: 0.50 maximum.
10. Solar Heat Gain Coefficient: 0.25 maximum.
11. Provide safety glazing labeling.
2.13 FIRE-PROTECTION-RATED GLAZING TYPES
A. Glass Type GL-4: 20-minute fire-rated safety glazing without hose-stream test; monolithic ceramic
glazing.
1. Provide safety glazing labeling.
B. Glass Type GL-5: 45-minute fire-rated safety glazing; film-faced ceramic glazing.
1. Provide safety glazing labeling.
C. Glass Type GL-6: 60-minute fire-rated safety glazing; film-faced ceramic glazing.
1. Provide safety glazing labeling.
GLAZING 08800 - 9